MAINTENANCE
Adjustment of the oil pump
Cooling system
The oil pump is adjustable. Adjustments are made by
turning the screw using a screwdriver or combination
spanner. The machine is supplied from the factory set to
To keep the working temperature as low as possible the
machine is equipped with a cooling system.
The cooling system consists of:
1
turn open. Turning the screw clockwise will reduce the
1
2
3
4
5
Air intake on the starter.
oil flow and turning the screw anti-clockwise will increase
the oil flow.
Air guide plate.
Fins on the flywheel.
Cooling fins on the cylinder.
Cylinder cover (directs cold air over the cylinder).
5
4
3
Recommended settings:
Bar 16"-18”
Bar 20"-24":
Bar 28" - :
2 turns from the closed position.
3 turns from the closed position.
4 turns from the closed position.
These recommendations apply to JONSERED chain oil,
for other chain oils increase the oil flow by one step.
2
1
WARNING! The engine must not be
running when making adjustments.
!
Clean the cooling system with a brush once a week, more
often in demanding conditions. A dirty or blocked cooling
system results in the machine overheating which causes
damage to the piston and cylinder.
”Turbo Air Cleaning” centrifugal
cleaning
Centrifugal cleaning means the following: All air to the
carburettor passes through the starter. Dirt and dust is
centrifuged out by the cooling fan.
IMPORTANT! In order to maintain operation of the
centrifugal cleaning system it must be regularly
maintained. Clean the air intake to the starter, the fins on
the flywheel, the space around the flywheel, inlet pipe and
carburettor compartment.
34
– English
Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
---|---|
Tags | Husqvarna CS2166, Husqvarna CS2172WH |
Model Year | 2009, 2010, 2011 |
Download File |
|
Document Type | Operator's Manual |
Language | English |
Product Brand | Husqvarna, Chainsaw |
Document File Type | |
Publisher | husqvarna.com |
Wikipedia's Page | Husqvarna |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)