Hook Angle
SPARK PLUG
The spark plug should be replaced each
year to ensure the engine starts easier and
runs better.
0.025
(0.65
inch
mm)
1.
2.
3.
4.
Loosen 3 screws on cylinder cover.
Remove the cylinder cover.
Rounded
Corner
Pull off the spark plug boot.
Remove spark plug from cylinder and
discard.
Replace with Champion RCJ--7Y spark
plug and tighten with a 3/4 inch (19 mm)
socket wrench. Tighten securely. Spark
plug gap should be 0.025 inch (0.6 mm).
Reinstall the spark plug boot.
Reinstallthecylindercoverand3screws
Tighten securely.
Right
Too Much Hook Angle
Squared Off
Corner
5.
6.
7.
Wrong
WARNING:
Maintain the proper
hook angle according to the manufacturer’s
specifications for the chain you are using. Im-
proper hook angle will increase the chance of
kickback which can result in serious injury.
4.
Check and lower depth gauges.
Depth Gauge Tool
File
Spark Plug Boot
Depth Gauge
COOLING SYSTEM
To keep the working temperature as low as
possible the machine is equipped with a
cooling system.
S
S
Place gauge tool on cutter.
If the depth gauge is higher than the
depthgaugetool,fileitleveltothetopof
the depth gauge tool.
The cooling system consists of:
S
Air intake on the starter
S
Maintain rounded front corner of
depth gauge with a flat file.
S Air guide plate
S Fins on the flywheel
S Cooling fins on the cylinder
S Cylinder cover (directs cold air over the
cylinder)
NOTE: The very top of the depth
gauge should be flat with the front
half rounded off with a flat file.
If you require further assistance or are unsure
about performing this procedure, contact your
authorized service dealer or call our customer
assistance help line at 1--800--554--6723.
IGNITION TIMING
Ignition timing is fixed and nonadjustable.
Clean the cooling system with a brush after
each use, more often in demanding condi-
tions. A dirty or blocked cooling system re-
sults in the machine overheating which
causes damage to the piston and cylinder.
STORAGE
If your chain saw is to be stored for a period
of time:
WARNING:
Perform the following
steps after each use:
S Clean saw thoroughly before storage.
S Allow the engine to cool, and secure the
unit before storing or transporting.
S
Store in a clean dry area.
S Lightly oil external metal surfaces and
S Store chain saw and fuel in a well venti-
lated area where fuelvapors cannotreach
sparks or openflames from water heaters,
electric motors or switches, furnaces, etc.
S Store chain saw with all guards in place
and position chain saw so that any sharp
object cannot accidentally cause injury.
S Store chain saw well out of the reach of
children.
guide bar.
S Oil the chain and wrap it in heavy paper or
cloth.
FUEL SYSTEM
Under FUELING ENGINE in the OPERA-
TION section of this manual, see message
labeled IMPORTANT regarding the use of
gasohol in your chain saw.
Fuel stabilizer is anacceptable alternativein
minimizing the formation of fuel gum depos-
its duringstorage.Addstabilizer to thegaso-
line in the fuel tank or fuel storage container.
SEASONAL STORAGE
Prepareyourunitfor storageattheendofthe
season or if it will not be used for 30 days or
more.
17
| Categories | Chainsaw Manuals, Poulan Pro Chainsaw Manuals |
|---|---|
| Tags | Poulan Pro PP4620AVX |
| Model Year | 2009 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Poulan Pro. Poulan Pro US phone support. Wheeled (Mowers, Tractors, Tillers, Snow Throwers): 1-800-849-1297, Handheld (Chainsaws, Trimmers, Blowers, Edgers): 1-800-554-6723, Chainsaw |
| Document File Type | |
| Publisher | poulanpro.com |
| Wikipedia's Page | Poulan |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)