Chain Brake
Cylinder Cover
Throttle
Lock--out
Direction
of Chain
Travel
Rear
Handle
Throttle
Trigger
Guide Bar
Chain
Catcher
Clutch
Cover
Bar
Knob
Choke/Fast
Idle Lever
Adjusting
Wheel
ON/STOP SWITCH
CHAIN BRAKE
The CHAIN BRAKE is a device designed to
stop the chain if kickback occurs. Thechain
brake activates automatically in the event of
kickback. The chain brake activates manu-
ally ifthefronthandguardis pushedforward.
Thechainbrakeis disengagedby pullingthe
front hand guard back toward the front han-
dle as far as possible.
The ON/STOP SWITCH is used to stop the
engine.
THROTTLE TRIGGER
The THROTTLE TRIGGER controls engine
speed.
THROTTLE LOCK---OUT
THROTTLE LOCK--OUT must be
pressed before you can squeeze the throttle
trigger. This feature prevents you from acci-
dentally squeezing the trigger.
The
CHAIN TENSION
It is normal for a new chain to stretch during
first15 minutes of operation.You shouldcheck
your chain tension each time before you start
the chain saw. See CHAIN TENSION in the
ASSEMBLY section.
CHOKE/FAST IDLE LEVER
Thechokeandfastidlespeedaresetbypull-
ing the CHOKE/FAST IDLE LEVER out fully
for cold or for refueled starting. The choke
provides additional fuel to the engine during
cold starting.
WARNING:
If the saw is operated
with a loose chain, the chain could jump off
the guide bar and result in serious injury to
the operator and/or damage the chain mak-
ing it unusable.
FUELING & LUBRICATION
BEFORE STARTING ENGINE
This engine is certified to operate on unleaded
gasoline. Before operation, gasoline must be
mixed with a good quality synthetic 2-cycle
air-cooled engine oil designed to be mixed at a
ratio of 40:1. Poulan/WEED EATER brand
synthetic oil is recommended. Mix gasoline
andoilataratioof40:1. A 40:1ratioisobtained
by mixing 3.2 fluid ounces ofoil with1 gallonof
unleaded gasoline. Included with this saw is a
WARNING:
Muffler is very hot dur-
ingandafter use. Donot touchthe muffler or
allow combustible material such as dry
grass or fuel to do so.
WARNING: Besure toread thefuel
handling information in the safety rules sec-
tionofthismanualbeforeyoubegin.Ifyoudo
not understand the fuel handling information
do not attempt to fuel your unit. Seek help
from someone that does understand the in-
formation or call the customer assistance
help line at 1-800-554-6723.
3.2
ounce container of oil. Pour the entire
contents of this container into 1 gallon of
gasolinetoachievetheproperfuelmixture.DO
NOT USE automotive oilor boatoil. Theseoils
will cause engine damage. When mixing fuel,
follow instructions printed on container. Once
oil is added to gasoline, shake container
FUELING ENGINE
momentarily
to assure that the fuel is
thoroughly mixed. Always read and follow the
safety rules relating to fuel before fueling your
unit.
WARNING: Removefuel capslow-
ly when refueling.
CAUTION: Never use straight gasoline in
your unit. This will cause permanent engine
damage and void the limited warranty.
FUEL REQUIREMENTS
This engine requires the use of minimum 87
octane [R+M]/2 clean gasoline.
HELPFUL TIP
Toobtain thecorrect oilmix
ratio, pour 3.2 ounces of
2--cycle
synthetic oil into
one gallon of fresh gas.
9
| Categories | Chainsaw Manuals, Poulan Pro Chainsaw Manuals |
|---|---|
| Tags | Poulan Pro PP4620AVX |
| Model Year | 2009 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Poulan Pro. Poulan Pro US phone support. Wheeled (Mowers, Tractors, Tillers, Snow Throwers): 1-800-849-1297, Handheld (Chainsaws, Trimmers, Blowers, Edgers): 1-800-554-6723, Chainsaw |
| Document File Type | |
| Publisher | poulanpro.com |
| Wikipedia's Page | Poulan |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)