4.
Loosen the flange nuts that secure the selector plate
to the control panel (Figure 29).
6. With the drive assembly 1/8 inch (3 mm) from the
roll pin, tighten the flange nuts that secure the speed
selector plate.
7.
8.
9.
Shift the speed selector lever to the R (Reverse)
position and back to third gear to check the
adjustment.
If the space between the roll pin and the drive
assembly is more than 3/16 inch (5 mm), repeat
steps 3 through 6.
Install the bottom cover and return the snowthrower
to the upright position.
Checking the Auger Gearbox
Grease
Service Interval: Yearly
The auger gearbox is packed with 5 oz. (140 g) of
Lubriplate MAG-1 (a low-temperature, high-pressure
grease) and is sealed at the factory. The pipe plug
(Figure 31) is for factory use only; you do not need to
check or add grease. If the gearbox is leaking grease,
contact an Authorized Service Dealer.
Figure 29
1.
Speed selector plate
2. Flange nuts
5.
Shift the speed selector lever to third gear and push
down on the speed selector plate to move the drive
assembly to the right.
Note: The drive assembly should be 1/8 inch (3
mm) from the roll pin; if not, slide the selector plate
(Figure 29) until the gap is 1/8 inch (3 mm); refer
to Figure 30.
Figure 31
1.
Pipe plug
Changing the Engine Oil
Service Interval: After the first 2 hours
Yearly
Every 25 hours
If possible, run the engine just before changing the
oil because warm oil flows better and carries more
contaminants.
Figure 30
1.
Roll pin
3. 1/8 inch (3 mm)
Max. fill: 21 oz. (0.62 l), type: automotive detergent
oil with an API service classification of SF, SG, SH, SJ,
SL, or higher.
2.
Drive assembly
•
For temperatures above 32°F (0°C), use SAE 30.
19
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38605, Toro Power Throw 522 |
| Model Number | 38605 |
| Model Year | 2009 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 290000001 - 290999999 |
| Product Name | Toro 522 Power Throw Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Small Frame |
| Swath | 22 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 21 oz. (.62l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | Auger 5 oz. Lubriplate Mag 1 grease |
| Engine Motor Model # | LH195SA-67435V |
| Engine Motor Size | 195cc |
| Engine Motor Type | 4 Cycle, 4 Cycle CARB3, EPA2 |
| Transmission Speed | 3 Forward/1 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Lawn and Garden readers have rated Toro 522 Power Throw 38605 Snow Blower Operators Manual, 2009 4.0 out of 4.0 based on 1 product reviews. Having trouble getting it started but once it gets going is awesome