Maintenance
2.
Use a 5/16 inch Allen wrench to turn the rotor shaft clockwise
(left-hand thread) while holding the rotor (Figure 13).
Important: All electrical repairs should be performed only by an
Authorized Service Dealer.
Note: Determine the left and right sides of the machine from the
normal operating position.
If the extension cord is plugged into the snowthrower,
someone could accidentally operate snowthrower while you
are performing maintenance on it, causing serious personal
injury.
Figure 13
1.
Rotor shaft
2. Rotor
Disconnect the extension cord before you perform any
maintenance.
Note: You may need to tap the Allen wrench with a hammer to
loosen the rotor shaft. Wedge a stick or a hammer handle in the
rotor to prevent it from rotating.
Lubricating the Snowthrower
Note: If you cannot remove the rotor shaft by holding the rotor,
remove the left side cover and the skid (Figure 14).
You do not need to lubricate the snowthrower; all the bearings were
lubricated at the factory for the life of the snowthrower.
Replacing the Scraper
The scraper is located at the bottom of the rotor housing as shown
in Figure 11.
Figure 14
1.
Left side cover
2. Skid
3.
Hold the hex nut with a 7/8 inch wrench while unscrewing the rotor
shaft (Figure 15).
Figure 11
1.
Scraper
2. Screw (2)
1.
Remove the 2 screws that secure the scraper to the snowthrower
(Figure 11).
Figure 15
2.
Install the new scraper and fasten it securely with 2 screws.
1.
Hex nut
Replacing the Rotor
4.
Hold the rotor and pull out the rotor shaft.
Remove the rotor.
1.
Remove the 3 screws that secure the right side cover and the skid
to the snowthrower frame (Figure 12).
5.
6.
Align the left side of the new rotor with the coupler.
Note: The 3 bosses on the rotor end must align with the slots on
the coupler (Figure 16).
Figure 12
1.
Right side cover
Screw
3. Skid
2.
6
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1800 Power Curve, Toro 38025 |
| Model Number | 38025 |
| Model Year | 2010, 2011 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Français |
| Serial Number | 310000001 - 310999999, 311000001 - 311999999 |
| Product Name | 1800 Power Curve Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower |
| Swath | 18 inch |
| Discharge | Single Stage |
| Engine Motor Size | 12 amp |
| Engine Motor Type | 120-VAC |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)