Service Dealer. Your Toro Dealer is specially trained to repair Toro
products and will ensure that your Toro stays “All” Toro.
Double-insulated Appliances
In a double-insulated appliance, two systems of insulation are
provided instead of grounding. No grounding means is provided on
a double-insulated appliance, nor should a means for grounding
be added to the appliance. Servicing a double-insulated appliance
requires extreme care and knowledge of the system, and should be
done only by the qualified service personnel at your Authorized Toro
Service Dealer. Replacement parts for a double-insulated appliance
must be identical to the parts they replace. A double-insulated
appliance is marked with the words “Double Insulation” or “Double
Figure 21
1.
2.
3.
Bolt (left-hand thread)
Washers
4.
5.
Small belt
Insulated.” The symbol (square within a square)
marked on the appliance.
may also be
Motor shaft pulley
Small pulley
Product Information
6.
Remove and discard the small belt (Figure 21).
7.
Slide 2 washers onto the bolt and insert the bolt through the small A model and serial number decal is located on the housing. Always
pulley.
refer to specific numbers o the decal in correspondence or when you
need replacement parts.
Note: The bolt must ride on the bearings in the small pulley.
Place the new belt on the small pulley.
8.
Storage
9.
Slide the belt over the motor shaft pulley (Figure 21).
10.
Torque the bolt to 25 to 30 in-lb (2.8 to 3.4 N·m). Do not overtighten
the bolt.
1.
Run the snowthrower for a few minutes to melt away any snow on
the snowthrower.
Note: The bolt, the bolt head, and the washers must be flush
against the small pulley.
2.
3.
Disconnect the extension cord from the snowthrower.
11.
Slip the large belt over the small pulley (Figure 21). Refer to
Replacing the Large Belt.
Examine the extension cord thoroughly for signs of wear or
damage. Replace it if it is worn or damaged.
4.
Examine the snowthrower thoroughly for worn, loose, or damaged
parts. To repair or replace parts, contact an local Authorized
Service Dealer for assistance.
Service
5.
6.
Store the extension cord with the snowthrower.
Store the snowthrower in a clean, dry place.
Toro has designed this product to give you years of trouble free use.
Should it need service, bring the product to your Authorized Toro
•
•
,
8
- 8 of 8
- « Previous
- 1
- …
- 6
- 7
- 8
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1800 Power Curve, Toro 38025 |
| Model Number | 38025 |
| Model Year | 2010, 2011 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Français |
| Serial Number | 310000001 - 310999999, 311000001 - 311999999 |
| Product Name | 1800 Power Curve Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower |
| Swath | 18 inch |
| Discharge | Single Stage |
| Engine Motor Size | 12 amp |
| Engine Motor Type | 120-VAC |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)