Figure 18
Figure 16
1.
Large pulley
2.
Belt
1.
2.
Coupler
Boss
3.
4.
Slot
5.
Slip the new belt over the small pulley (Figure 19).
Drive hex
Note: When mounting the coupler to the drive hex, align the
coupler tabs to the inside.
7.
Slide the right side of the rotor into the mounting position.
8.
Insert the rotor shaft through the rotor and ensure that the shaft fits
into the bearing on the right side.
9.
Torque it to at least 10 ft-lb (14 N⋅m).
10.
Install the cover and the skid.
Replacing the Large Belt
Figure 19
1.
2.
Idler arm
3. Small pulley
1.
Remove the 3 screws that secure the left side plate to the
snowthrower frame (Figure 14).
Idler pulley
2.
Remove the side plate and the skid.
6.
Lift up the idler arm and slip the belt under the idler pulley
(Figure 19).
7.
Rotate the rotor with your left hand while sliding the belt onto the
large pulley with your right hand (Figure 20).
The idler spring could fly in your face while you remove it,
causing personal injury.
Wear safety goggles when working with the idler spring.
3.
Remove the idler spring from the idler arm (Figure 17).
Figure 20
8.
9.
Assemble the idler spring (Figure 17), ensuring that the idler pulley
rides on the belt.
Install the left side cover and the skid with the 3 screws.
Replacing the Small Belt
Figure 17
1.
Remove the screws that secure the left side plate and the skid to
the snowthrower frame (Figure 14).
1.
Idler spring
2. Idler arm
2.
3.
Remove the side plate and the skid.
4.
Rotate the rotor with your left hand while sliding the belt off the
large pulley with your right hand (Figure 18).
Remove the large belt by slowly sliding it off the small pulley (Fig.
Figure 18).
Note: Refer to steps 2 and 3 of Replacing the Large Belt.
4.
5.
Remove the small pulley bolt (left hand thread) by turning the bolt
clockwise.
Remove the 2 washers and the small pulley (Figure 21).
7
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1800 Power Curve, Toro 38025 |
| Model Number | 38025 |
| Model Year | 2010, 2011 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Français |
| Serial Number | 310000001 - 310999999, 311000001 - 311999999 |
| Product Name | 1800 Power Curve Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower |
| Swath | 18 inch |
| Discharge | Single Stage |
| Engine Motor Size | 12 amp |
| Engine Motor Type | 120-VAC |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)