Figure 45
Figure 47
1.
Traction drive belt cover
1.
Tang washer
2.
Idler bracket bolt
2.
Check tension by depressing belt (Figure 46) at mid
span of pulleys with 4 ± 1 lb of force. Belt should
deflect 3/16 to 5/16 inch (4.8 to 7.9 mm). If the
deflection is incorrect, proceed to next step.
B. Using a 3/8 inch drive torque wrench, rotate the
idler bracket with 35-40 in.-lb. of torque to set
the belt tension (Figure 48). While holding the
torque wrench setting, tighten the idler bracket
mounting bolt (The tang washer is installed
to prevent the belt from slipping.). Do not
over-tension the belt.
Figure 46
1.
Traction drive belt
Figure 48
3.
To adjust belt tension:
1.
2.
Traction drive belt
Idler bracket
3.
3/8 inch Torque wrench
here
A. On back side of side plate, loosen the bolt
securing the idler bracket to the side plate
(Figure 47).
C. Install the belt cover.
29
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 04019, Toro 04024, Toro 04025, Toro 04202, Toro 04206, Toro 04207, Toro 04208, Toro Greensmaster |
| Model Year | 2010 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)