Cutting Unit Maintenance
Separating the Cutting Unit
from the Traction Unit
1.
2.
Place the mower on its drums on a level surface.
Lower kick stand. Insert a 1/4" dia. pin or equivalent
into frame hole above kick stand mounting bolt
(Figure 51).
Figure 53
1.
Transmission coupling
7.
Reverse procedure to install cutting unit.
Note: When tightening the pivot arm mounting
fasteners, use an adjustable end wrench to hold the
pivot arm parallel to the side plate (Figure 54).
Figure 51
1.
2.
1/4" Pin
Handle
3. Kick stand
3.
Remove grass basket.
4.
Remove (2) bolts securing cutting unit pivot arms to
traction unit frame tube (Figure 52).
Figure 54
Adjusting the Rear Roller
1.
Adjust the rear roller brackets to the low or high
position depending on desired height of cut range
(Figure 55and Figure 56).
Figure 52
1.
Cutting unit pivot arms
Traction unit frame tube
3. Bolts
2.
•
Position the spacer above the sideplate mounting
flange (factory setting) when height of cut
settings range from 1/16 to 1/4" (Fig. 10).
5.
Rotate pivot arms forward (Figure 52) and rest
traction unit on restrained kickstand.
6.
Pull cutting unit forward about 2 inch (51 mm)
and then to the right to disengage the transmission
coupling (Figure 53).
31
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 04019, Toro 04024, Toro 04025, Toro 04202, Toro 04206, Toro 04207, Toro 04208, Toro Greensmaster |
| Model Year | 2010 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)