Toro 04202 04206 04207 04208 04019 04024 04025 Greensmaster Flex 18 Flex 21 Lawn Mower Operators Manual, 2010

To start and stop the engine:
•   If the engine  must be running to perform a
maintenance adjustment, keep hands, feet, clothing,
and any parts of the body away from the cutting unit,
attachments and any moving parts. Keep everyone
away.
Open fuel shut-off valve.
Verify that the traction and reel drive control
levers on handle are in Neutral position.
Move the on/off switch, located on the control
panel, to ON position, set choke to full choke
position (cold start) and throttle to half throttle.
To ensure safety and accuracy, have an Authorized
Toro Distributor check the maximum engine speed
with a tachometer. Maximum governed engine speed
should be 3600 RPM.
Pull starter cord to start engine.
Move throttle to Slow and on/off switch to Off
position to stop engine.
If major repairs are ever needed or if assistance is
desired, contact an Authorized Toro Distributor.
To transport mower from one area to another:
Use only Toro-approved attachments  and
replacement parts. The warranty may be voided if
used with unapproved attachments.
Install transport wheels.
Disengage reel drive.
Start engine.
Sound Power Level-Flex 18
Press down on handle to raise front of mower
and engage traction drive.
This unit has a guaranteed sound power level of 96 dBA,
which includes an Uncertainty Value (K) of 1 dBA.
Before beginning mowing operation:
Disengage traction drive.
Stop engine.
Sound power level was determined according to the
procedures outlined in EN 11094.
Remove transport wheels.
Start engine
Sound Pressure Level-Flex 18
Engage reel drive.
This unit has a sound pressure level at the operator’s
ear of 84 dBA, which includes an Uncertainty Value (K)
of 1 dBA.
Using the machine demands attention. To prevent
loss of control:
Do not drive close to sand traps, ditches, creeks,
or other hazards.
Sound pressure level was determined according to the
procedures outlined in EN 836.
Reduce speed when making sharp turns. Avoid
sudden stops and starts.
Vibration Level-Flex 18
When near or crossing roads, always yield the
right-of-way.
Hand-Arm
The grass basket must be in place, during  the
mowing operation, for maximum safety. Shut the
engine off before emptying the basket.
Measured vibration level for right hand = 2.36 m/s2
Measured vibration level for left hand = 2.47 m/s2
Uncertainty Value (K) = 0.5 m/s2
Do not touch the engine, muffler, or exhaust pipe
while the engine is running or soon after it has
stopped because these areas could be hot enough
to cause burns.
Measured values were determined according to the
procedures outlined in EN 836.
When a person or pet appears unexpectedly in
or near the mowing area, stop mowing. Careless
operation, combined with terrain angles, ricochets,
or improperly positioned guards can lead to thrown
object injuries. Do not resume mowing until the
area is cleared.
Sound Power Level-Flex 21
This unit has a guaranteed sound power level of 97 dBA,
which includes an Uncertainty Value (K) of 1 dBA.
Sound power level was determined according to the
procedures outlined in EN 11094.
Maintenance and Storage
Check all fuel lines for tightness and wear on a
regular basis. Tighten or repair them as needed.
6
Product Specification
CategoriesLawn Mower Manual, Toro Lawn Mower Manual
Tags, , , , , , ,
Model Year2010
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 40 pages
Document TypeOperator's Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website