Stopping the Engine
Important: If the machine moves when the traction
lever is in the released position, check the traction
cable (refer to Checking and Adjusting the Traction
Cable) or take the machine to an Authorized Service
Dealer for service.
1.
Move the throttle to the Slow position, and then to
the Stop position (Figure 33).
Important: To operate the traction drive, you must
operate the machine with the self-propel feature
engaged. Refer to Freewheeling or Using the
Self-propel Drive.
1.
To engage the traction drive, squeeze the left hand
(traction) lever to the handgrip (Figure 35).
Figure 33
2.
Wait for all moving parts to stop before leaving the
operating position.
3.
4.
Remove the ignition key.
Figure 35
Close the fuel shutoff valve by rotating it clockwise
(Figure 34).
2.
To stop the traction drive, release the traction lever.
Using the Wheel Clutch Levers
Models 38634, 38644, and 38654 only
The wheel clutch levers allow you to momentarily
disengage the drive to one or both wheels with the
traction drive lever still engaged. This enables you to
turn and maneuver the machine easily.
Note: Holding down the traction lever against the
handle engages the traction drive to both wheels.
Figure 34
To turn the machine to the right, lift up on the right
wheel clutch lever and squeeze it toward the handle
(Figure 36).
5.
Pull the recoil starter 3 or 4 times. This helps prevent
the recoil starter from freezing up.
Operating the Traction Drive
CAUTION
If the traction drive is not properly adjusted, the
machine may move in the direction opposite of
what you intended, causing injury and/or property
damage.
Figure 36
Carefully check the traction drive and adjust
it properly, if necessary; refer to Checking the
Traction Drive Operation in Setup for more
information.
Note: This disengages the drive to the right wheel
while the left wheel continues driving, and the machine
turns to the right.
17
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38614, Toro 38624, Toro 38624W, Toro 38634, Toro 38644, Toro 38654, Toro Power Max 726OE |
| Model Number | 38614, 38624, 38624W, 38634, 38644, 38654 |
| Model Year | 2011 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 311000001 - 311999999 |
| Product Name | Toro Power Max 726 OE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 26 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Briggs & Stratton |
| Engine Oil Type | 20 oz. (.6l) 5w-30 or 10w-30 / API SH or higher |
| Engine Motor Model # | 15C1040139E8 |
| Engine Motor Type | 4 Cycle, 4 Cycle CARB2, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro Power Max 726OE 38614 38624 W 38634 38644 38654 Snow Blower Operators Manual, 2011 5.0 out of 5.0 based on 1 product reviews. I need to clean carburetor left gas in it need to said more.