Toro Power Max 726OE 38614 38624 W 38634 38644 38654 Snow Blower Operators Manual, 2011

Figure 9
Figure 6
Note:  The gap should be approximately the
thickness of a pencil (1/4 inch or 6 mm). If it is
greater, loosen the cable clamp nut, slide the cable
jacket up slightly, tighten the cable clamp nut, and
check the gap again.
1.
Wheel clutch lever
3.
Remove the nut and washer from the handle, attach
the cable clamp on the cable to the handle, install
the washer and the nut, and hand tighten the nut
(Figure 7).
6.
Repeat steps 2 through 5 for the other cable.
3
Installing the Traction Control
Linkage
No Parts Required
Procedure
Figure 7
1.
Cable clamp (2)
1.
Remove the hairpin cotter and washer from the
lower end of the speed control rod and insert the
lower end of the rod into the lower link arm so that
the bent end of the speed control rod faces rearward
(Figure 10).
Important: Ensure that the curved side of the
cable clamp is against the handle and that the
cable is routed below the clamp bolt. The cable
must be in a straight line from the cable clamp
to the point where it attaches to the wheel clutch
lever.
4.
Pull the cable jacket down gently until the wheel
clutch lever is down and the slack is out of the cable,
then tighten the cable clamp nut securely (Figure 8).
Figure 10
2.
3.
Secure the lower end of the speed control rod with
the washer and hairpin cotter that you previously
removed.
Figure 8
5.
Squeeze the lever fully, then check the gap between
the bottom of the handle and the wheel clutch lever
end (Figure 9).
Remove the hairpin cotter and the outer washer
from the trunnion on the upper end of the speed
control rod (Figure 11).
9
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags, , , , , ,
Model Number38614, 38624, 38624W, 38634, 38644, 38654
Model Year2011
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 32 pages
Document TypeOperator's Manual
LanguageEnglish
Serial Number311000001 - 311999999
Product NameToro Power Max 726 OE Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Product SeriesSnowthrower, Two Stage Power Max
Swath26 inch
DischargeTwo Stage
Engine ManufacturerBriggs & Stratton
Engine Oil Type20 oz. (.6l) 5w-30 or 10w-30 / API SH or higher
Engine Motor Model #15C1040139E8
Engine Motor Type4 Cycle, 4 Cycle CARB2, EPA2
Transmission Speed6 Forward/2 Reverse
Transmission TypeFriction Disc
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro Power Max 726OE 38614 38624 W 38634 38644 38654 Snow Blower Operators Manual, 2011 5.0 out of 5.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Toro Power Max 726OE 38614 38624 W 38634 38644 38654 Snow Blower Operators Manual, 2011 SKU UPC Model
dennis jeppesen on Nov 17, 2012. carburetor manual toro 38644

I need to clean carburetor left gas in it need to said more.


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website