Figure 54
Figure 56
1.
Oil drain cap
1.
Back cover
2.
Slide an oil drain pan under the drain extension and
remove the oil drain cap.
4.
Move the speed selector lever to Position R2.
5.
Dip your finger in automotive engine oil and lightly
lubricate hex shaft.
3.
Drain the oil.
Note: Dispose of the used oil properly at a local
recycling center.
6.
7.
8.
Move the speed selector lever to Position 6.
Lubricate the other end of the hex shaft.
4.
5.
Install the oil drain cap.
Move the speed selector lever forward and rearward
a few times.
Fill the crankcase with oil. Refer to Filling the
Engine Crankcase with Oil.
9. Install the back cover and return the machine to the
operating position.
Lubricating the Hex Shaft
Replacing the Spark Plug
Service Interval: Yearly—Lubricate the hex shaft.
Service Interval: Every 100 hours—Replace the spark
Lightly lubricate the hex shaft yearly with automotive
engine oil (Figure 55).
plug.
Use a Champion QC12YC or equivalent spark plug.
Note: To access the spark plug, you must first remove
the upper snow hood (Figure 57).
Figure 55
1.
2.
Hex shaft
Aluminum friction plate
3. Rubber wheel
Figure 57
Important: Do not get oil on the rubber wheel
or the aluminum friction drive plate because the
traction drive will slip (Figure 55).
1.
2.
Choke knob
3.
4.
Ignition key
Screw (2)
Upper snow hood
1.
2.
Drain the gasoline from the fuel tank.
1.
Remove the choke knob and the ignition key
(Figure 57).
Tip the machine forward onto its auger housing and
block it so that it cannot fall.
2.
3.
Remove the 2 screws that secure the upper snow
hood to the machine (Figure 57).
3.
Remove the back cover (Figure 56).
Slowly remove the upper snow hood, ensuring that
the primer bulb hose and the ignition wire remain
connected.
25
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38614, Toro 38624, Toro 38624W, Toro 38634, Toro 38644, Toro 38654, Toro Power Max 726OE |
| Model Number | 38614, 38624, 38624W, 38634, 38644, 38654 |
| Model Year | 2011 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 311000001 - 311999999 |
| Product Name | Toro Power Max 726 OE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 26 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Briggs & Stratton |
| Engine Oil Type | 20 oz. (.6l) 5w-30 or 10w-30 / API SH or higher |
| Engine Motor Model # | 15C1040139E8 |
| Engine Motor Type | 4 Cycle, 4 Cycle CARB2, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro Power Max 726OE 38614 38624 W 38634 38644 38654 Snow Blower Operators Manual, 2011 5.0 out of 5.0 based on 1 product reviews. I need to clean carburetor left gas in it need to said more.