1.
2.
Start the engine; refer to Starting the Engine.
7
Move the speed selector to Position R1; refer to
Operating the Speed Selector.
3.
Squeeze the left hand (traction) lever to the hand-grip
(Figure 15).
Checking the Tire Pressure
No Parts Required
Procedure
The tires are overinflated at the factory for shipping. Reduce
the pressure equally in both tires to between 17 and 20 psi
(116
and 137 kPa).
8
Checking the Skids and
Scraper
Figure 15
The machine should move rearward. If the machine
does not move or moves forward, complete the
following:
A. Release the traction lever and stop the engine.
B. Disconnect the trunnion from the speed selector
lever (Figure 5).
No Parts Required
Procedure
C. Turn the trunnion downward (clockwise) on the
speed control rod (Figure 5).
Refer to Checking and Adjusting the Skids and Scraper in
Maintenance.
D. Connect the trunnion to the speed selector lever
(Figure 5).
4.
5.
Release the traction lever.
9
Move the speed selector to the Position 1; refer to
Operating the Speed Selector.
6.
Squeeze the left hand (traction) lever to the hand-grip
(Figure 15).
Checking the Traction Drive
Operation
The machine should move forward. If the machine
does not move or moves rearward, complete the
following:
No Parts Required
Procedure
A. Release the traction lever and stop the engine.
B. Disconnect the trunnion from the speed selector
lever (Figure 5).
C. Turn the trunnion upward (counterclockwise) on
the speed control rod (Figure 5).
CAUTION
If the traction drive is not properly adjusted, the
machine may move in the direction opposite of
what you intended, causing injury and/or property
damage.
D. Connect the trunnion to the speed selector lever
(Figure 5).
7.
If you made any adjustments, repeat this procedure
until no adjustments are required.
Carefully check the traction drive and adjust it
properly, if necessary.
Important: If the machine moves when the traction
lever is in the released position, check the traction cable
(refer to Checking and Adjusting the Traction Cable) or
take the machine to an Authorized Service Dealer for
service.
Note: To check the traction drive operation, the self-propel
feature must be engaged by ensuring the wheels are pinned
in the axle. Refer to (page ).
12
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 37777, Toro Power Max 826 OTE |
| Model Number | 37777 |
| Model Year | 2015 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 315000001 - 315999999 |
| Product Name | Power Max 826 OTE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 26 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Briggs & Stratton |
| Engine Oil Type | 18 oz. (.54l) 30w or 10w-30 / API SF or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | 12D1050172F8 |
| Engine Motor Size | 205cc |
| Engine Motor Type | 4 Cycle |
| Engine Speed | 3300±100 RPM |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Tire Pressure | 17-20 PSI / 116-137 kPa |
| Spark Plug | Champion QC12YC |
| Spark Plug Gap | .030"/ .76mm |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)