OPERATION
IMPORTANT: If the belt squeals when the
WARNING: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
attachment clutch lever is engaged, the
impeller may be frozen in the auger housing.
Immediately release the attachment clutch
lever and move the unit into a heated area to
thaw.
WARNING: To avoid injury to hands
and feet, always disengage clutches,
shut off engine, and wait for all
movement to stop before unclogging
or working on snow thrower.
Keep hands and feet away from
auger and impeller.
NOTE: If belt squeals when impeller turns
freely, see Attachment Drive Belt
Replacement on page 20.
Ignition Switch (Push/Pull Safety
Key)
Key Switch has two positions:
1. “Stop” - pulled out
CONTROLS AND FEATURES
2.
"Run" - pushed in
See Figure 7 for all Controls and Features
locations.
NOTE: DO NOT twist key after it is inserted.
Dual Handle Interlock
When attachment clutch and then traction
drive clutch are engaged, the attachment
clutch will remain engaged (lever down) if
released. To stop attachment, release traction
drive clutch and both clutches will disengage.
2
1
Traction Drive Clutch - Left Hand
Lever
Engine Shutoff Switch
Squeeze the traction drive
clutch lever against the
2
1.
Set the engine shutoff switch to the run
position ("Run") to start and operate the
engine.
handlebar (1) to engage
wheel drive for propelling
unit. Forward speed will
2.
Set the engine shutoff switch to the stop
position ("Stop") to shut off a running
engine.
1
vary according to snow
depth and moisture
content.
Primer Bulb
Release lever (2) to stop
movement.
Pushing the primer bulb in adds fuel for
easier engine start. Refer to Starting and Shut
Off on page 15.
OL2701
NOTE: When traveling to or from the area to
be cleared, press down on the handlebars
enough to raise the front of the unit slightly off
the surface. Engage the traction drive clutch
without engaging the attachment drive clutch.
Attachment Clutch - Right Hand
Lever
Speed Selector
Squeeze attachment
clutch lever against
2
Position the speed selector in the appropriate
speed notch to control forward and reverse
travel.
handlebar (1) to
engage attachment.
Release both clutch
levers (2) to disengage
power and apply brake
1
to attachment.
08000127A
6
1 1 2
OS8225
OL2691
GB - 12
| Categories | Ariens Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Ariens 920400, Ariens 920401, Ariens Sno-Tek 24, Ariens Sno-Tek 26 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Ariens, Snow Blower |
| Document File Type | |
| Publisher | ariens.com |
| Wikipedia's Page | Ariens |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Lawn and Garden readers have rated Ariens Sno Tek 24 26 920400 920401 Snow Blower Owner Manual 4.0 out of 4.0 based on 1 product reviews. good site to find different manuals. Trying to download. hope it works.