Ariens Sno Tek 24 26 920400 920401 Snow Blower Owner Manual

DISCHARGE CHUTE
d.  Stop unit.
e.  Shift speed selector into first
reverse speed.
f.  Engage the traction clutch. Unit
should move backward.
g.  Shut off unit.
If discharge chute does not stay in position
while operating, tighten nut on carriage bolt at
pivot point to increase tension on spring
(Figure 17).
7.
8.
Adjust pivot pin on the shift rod as
necessary so unit travels forward when
speed selector is in first forward position
and travels backward when speed
selector is in first reverse position.
Connect the pivot pin to the speed
selector arm with the hardware removed
in step 1.
NOTE: If first forward speed is too fast,
disconnect adjustment pivot pin from speed
selector arm. Rotate pivot pin to move it up
the shift rod a maximum of two turns and
reconnect pivot pin to speed selector arm.
1
3
1.
2.
Spring
Nut
2
1
2
4
1
OS7177
Figure 17
SPEED SELECTOR
ADJUSTMENT
To adjust (Figure 18):
1.
Disconnect adjustment pivot pin from
speed selector arm. Save hardware for
reinstallation.
Place the speed selector on dash panel
in the fastest forward speed position.
Turn the speed selector arm straight
down towards the ground as far as it will
go.
2
1.  Shift Rod
2.
Adjustment Pivot Pin
3.  Speed Selector Arm
2.
3.
4.
Hairpin
OS8060
Figure 18
4.
Thread the adjustment pivot pin along
the shift rod until it aligns with the mating
hole on the speed selector arm, and
then turn it up the shift rod 3 turns. Insert
the pivot pin into hole.
ATTACHMENT DRIVE BELT
REPLACEMENT
Remove Attachment Drive Belt
5.
6.
Connect the pivot pin to the speed
selector arm with the hardware removed
in step 1.
(Figures 19, 20 and 21)
1.
Shut off engine, remove key, disconnect
spark plug wire and allow unit to cool
completely.
Check forward and reverse speeds:
a.  Start unit.
b.  Shift speed selector into the first
forward speed.
c.  Engage the traction clutch. Unit
should move forward.
2. Remove two screws securing belt cover
to unit and remove belt cover.
3.
Remove spring pin from chute crank and
separate.
GB - 20
Product Specification
CategoriesAriens Snow Blower Manuals, Snow Blower Manuals
Tags, , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 32 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandAriens, Snow Blower
Document File TypePDF
Publisherariens.com
Wikipedia's PageAriens
CopyrightAttribution Non-commercial
(1 votes, average: 4 out of 4)
Lawn and Garden readers have rated Ariens Sno Tek 24 26 920400 920401 Snow Blower Owner Manual 4.0 out of 4.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Ariens Sno Tek 24 26 920400 920401 Snow Blower Owner Manual SKU UPC Model
Sudha on Aug 02, 2014. Good site

good site to find different manuals. Trying to download. hope it works.


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website