4.
5.
Remove belt finger by removing cap
screws mounting belt finger to engine
(Figure 20 or Figure 21).
Remove attachment drive belt from
engine sheave (it may be necessary to
turn engine sheave using recoil starter
handle).
IMPORTANT: With the clutch lever engaged,
the belt finger located opposite the belt idler
must be less than 1/8 in. (3,2 mm) from the
belt, but not touching the belt, or belt
grabbing may occur causing impeller to rotate
while the attachment clutch is disengaged
(Figure 21).
5.
Adjust clutch per Attachment
Clutch/Brake Adjustment on page 23.
CAUTION: Always support the unit
frame and housing when loosening
the cap screws holding them
together. Never loosen cap screws
while unit is in service position.
WARNING: AVOID INJURY. Auger
must stop within 5 seconds when
attachment lever is released or
serious injury or unit damage may
result.
IMPORTANT: To avoid bending bottom cover,
when tipping unit apart, support handlebars
firmly or tip unit up on housing and remove
bottom cover by removing six cap screws
before separating unit.
6. Replace chute crank and secure with
spring pin.
7. Run in the attachment belt. See Run-in
Attachment Belt on page 10.
6.
7.
Support the frame and housing.
8.
Replace belt cover.
Remove hex bolts securing housing to
frame (two on each side). Tip housing
and frame apart on pivot pin.
Remove attachment drive belt from
attachment pulley (hold brake away from
belt).
2
8.
3
4
5
1
1
2
3
4
8
6
7
1.
2.
Pinion Gear
Belt Cover
3. Spring Pin
4. Chute Crank
1.
2.
Traction Belt
Idler
Traction Drive
Belt
Engine Sheave
Belt Finger
Attachment
Drive Belt
6.
7.
8.
Attachment
Pulley
Attachment
Idler Nut
Attachment
Belt Idler
Figure 19
OS8062
Replace Attachment Drive Belt
3.
4.
5.
1.
Place new belt onto attachment pulley.
NOTE: Holding down the attachment clutch
lever will make it easier to reconnect the
housing and frame.
2.
Tip housing and frame back together
and secure with hex bolts.
Figure 20
OS8160
3.
4.
Place belt onto engine sheave.
Replace belt finger.
GB - 21
| Categories | Ariens Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Ariens 920400, Ariens 920401, Ariens Sno-Tek 24, Ariens Sno-Tek 26 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Ariens, Snow Blower |
| Document File Type | |
| Publisher | ariens.com |
| Wikipedia's Page | Ariens |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Lawn and Garden readers have rated Ariens Sno Tek 24 26 920400 920401 Snow Blower Owner Manual 4.0 out of 4.0 based on 1 product reviews. good site to find different manuals. Trying to download. hope it works.