SERVICE & ADJUSTMENTS
Gib adJUSt Ment
Periodicallywedge assemblyremoveandandthereplaceback plate.the “gibs” (spacers) between the
NOTE: The gibs may be rotated and/or turned over for even wear.
1.
Loosen the lock nuts under each back plate and slide the gibs out.
See Figure 5-1.
Adjustment
Bolt
2.
3.
4.
Turn or replace the gibs.
Reassemble the back plate and secure with the lock nuts.
Readjust the bolts on the side of the wedge assembly.
hOSe CLa MPS
Gib
•
Check, before each use, if hose clamps on the suction hose
(attached to the side of the pump) are tight. Check the hose clamps
on the return hose at least once a season.
Jam Nut
Lock Nut
Figure -1
WaRninG
Do not at any time make any adjustments without first stopping
engine, disconnecting spark plug wire, and grounding it against
the engine. Always wear safety glasses during operation or while
performing any adjustments or repairs.
WedGe aSSeMbLY adJUSt Ment
As normal wear occurs and there is excessive “play” between the
wedge and beam, adjust the bolts on the side of the wedge assembly
to eliminate excess space between the wedge and the beam.
1.
2.
Loosen the jam nuts on the two adjustment bolts on the side of the
wedge. See Figure 5-1.
Turn the adjustment bolts in until snug and then back them off
slowly (approximately 1.5 turns) until the wedge assembly will slide
on the beam.
3.
Re-tighten the jam nuts securely against the side of the wedge to
secure the adjustment bolts in this position.
1
Categories | Craftsman Lawn Mower Manuals, Lawn Mower Manual |
---|---|
Tags | Craftsman 675 247.77640 |
Download File |
|
Document Type | Operator's Manual |
Language | English |
Product Brand | Craftsman. Customer Service Representatives are available by phone: Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | craftsman.com |
Wikipedia's Page | Craftsman (tools) |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)