MTD 140 152 Snow Blower Owners Manual

If
the
snow
thrower
should
start
to
vibrate
•   Never operate  the machine at  high transport  speeds
on  slippery   surfaces.  Look   behind  and   use  care
when backing.
abnormally,  stop the  engine  and check  immediately
for  the  cause.  Vibration  is   generally  a  warning  of
trouble.
Never direct discharge at  bystanders or allow anyone
in front of unit.
Stop   engine   whenever   you   leave   the   operating
position,
before   unclogging   the    collector/impeller
Disengage
power
to
collector/impeller
when
housing or  discharge guide, and  making any repairs,
adjustments,  or inspections.  Never  place your  hand
in the discharge  or collector openings.  Use a stick or
wooden   broom   handle   to   unclog   the   discharge
opening.
transporting or not in use.
Use only  attachments  and accessories  approved by
the  manufacturer  of  snow  thrower  (such  as  wheel
weights, counter weights, cabs, etc.).
Never   operate   the    snow   thrower   without   good
visibility or  light. Always  be sure  of your  footing and
keep a firm hold on the handles. Walk, never run.
Take  all possible  precautions  when leaving  the  unit
unattended.  Disengage   the  collector/impeller,   shift
into neutral, stop the engine, and remove the key.
Muffler  and  engine  become  hot  and   can  cause  a
burn. Do not touch.
When cleaning, repairing, or  inspecting, make certain
collector/impeller and  all moving parts  have stopped.
Disconnect spark plug  wire and keep away from  plug
to prevent accidental starting.
3.  MAINTENANCE AND STORAGE
Check  shear  bolts,  engine  mounting  bolts,  etc.,  at
frequent  intervals   for  proper  tightness   to  be  sure
equipment is in safe working condition.
Do  not   run  engine  indoors,   except  when  starting
engine  and  transporting  snow  thrower  in  or  out  of
building. Open doors. Exhaust fumes are dangerous.
Never  store  the  machine with  fuel  in  the  fuel  tank
inside a  building where  ignition sources  are present,
such as hot  water and space heaters, clothes  dryers,
and  the like.  Allow  engine  to cool  before  storing  in
any enclosure.
Do   not   clear   snow   across  the   face   of   slopes.
Exercise  extreme  caution  when  changing   direction
on slopes. Do not attempt to clear steep slopes.
Never  operate snow  thrower without  guards,  plates,
or other safety protection devices in place.
Always  refer   to  operator's  manual   instructions  for
important  details if  snow thrower  is  to be  stored for
an extended period.
Never  operate  snow  thrower  near glass  enclosure,
automobiles,  window   wells,  drop  off,   etc.,  without
proper adjustments of  snow thrower discharge angle.
Keep children and pets away.
Run  machine a  few  minutes after  throwing  snow to
prevent freeze up of collector/impeller.
Do  not overload  machine  capacity  by attempting  to
clear snow at too fast a rate.
Check   clutch   controls   periodically  to   verify   they
engage   and   disengage   properly   and   readjust   if
necessary. Refer to operator's  manual for adjustment
instructions.
WARNING - YOUR RESPONSIBILITY: Restrict  the use  of  this power  machine  to persons  who
read, understand and follow the warnings and instructions in this manual and on the machine.
Figure 1
3
Product Specification
CategoriesMTD Snow Blower Manuals, Snow Blower Manuals
Tags, ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 24 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website