3
Setup And
Adjustment
Contents of Carton
Carton contents are listed below with part numbers in
parentheses.
1.
2.
3.
Two Ignition Keys (725-0201)
2.6 oz Bottle of 2 Cycle Oil (737-04037)
Extension Cord (if so equipped) (629-0236)
1
WARNING: Disconnect the spark plug
wire and ground it against the engine to
prevent unintended starting.
2
Positioning the Upper Handle
1.
2.
Remove packing material, if present.
Making sure not to pinch the cable in the process,
pivot the upper handle into the operating position as
illustrated in Figure 1 until it clicks into place.
3.
Tighten the wing knobs to secure the handle in place
Figure 1
as in Figure 1.
NOTE: This Operator’s
Manual covers several
models. Snow thrower
features vary by
Assembling the Discharge Chute
For shipping reasons, the snow thrower has been
packaged with the upper chute pivoted all the way down.
To pivot it upward, proceed as follows:
2
model. Not all features
discussed in this
1.
2.
3.
Turn the chute until the chute opening is facing
straight ahead. Remove the wing knob and carriage
bolt from the lower chute. See Figure 2.
manual are applicable
to all snow thrower
models.
Pivot the upper chute upward over the lip on the lower
chute so that there is NO gap between the upper
chute and the lower chute.
3
NOTE: All references
to left or right side of
the snow thrower is
from the operating
position only.
Resecure with the hardware just removed. If installed
1
correctly, your snow thrower should look like Figure 3.
IMPORTANT:snow thrower. Do not use the chute handle to lift the
Figure 2
IMPORTANT:
Do not use the chute
handle to lift the snow
thrower.
Chute Handle
Figure 3
6
| Categories | MTD Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | MTD 230, MTD 240, MTD 250, MTD 260, MTD 261, MTD S230, MTD S240, MTD S250, MTD S260, MTD S261, MTD Snow Blower Manual |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | MTD, Snow Blower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)