4
Auger Control
Know
Electric Starter Button
Key
Your Snow
Thrower
Figure 4A
Starter Handle
Fuel Cap
Primer
Chute Assembly
Spark Plug Access
Chute Handle
IMPORTANT:
This unit runs on a
mixture of gasoline
and oil. Do NOT
Choke Lever
operate the snow
thrower without first
reading the engines
operator’s manual for
instructions regard-
ing proper fuel and
engine oil.
Shave Plate
Auger
Figure 4
IMPORTANT: This unit runs on a mixture of gasoline
and oil. Do NOT operate the snow thrower without first
reading the engines operator’s manual for instructions
regarding proper fuel and engine oil.
Spark Plug Cover
Remove spark plug cover to access spark plug.
Auger
When engaged, the augers rotation draws snow into the
auger housing and throws it out the discharge chute.
Rubber paddles on the augers also aid in propelling the
unit as they come in contact with the pavement.
Choke Lever
Activating choke control closes the choke plate on
carburetor and aids in starting engine. Refer to the engine
manual packed with unit for more detailed instructions.
Auger Control Handle
Primer
Located on the upper handle, the auger control handle
is used to engage and disengage drive to the auger.
Squeeze the control handle against the upper handle to
engage auger; release it to disengage.
Depressing primer forces fuel directly into engine’s
carburetor to aid in cold-weather starting. Refer to engine
manual packed with unit for more detailed instructions.
Ignition Key
Discharge Chute / Chute Handle
Rotate the discharge chute to the left or right using chute
handle. Pitch of the discharge chute controls angle at
which the snow is thrown. Loosen wing knob on side
of the discharge chute before pivoting discharge chute
upward or downward. Retighten the knob once desired
position has been achieved.
Ignition key must be present, inserted in key switch, and
in the “ON” position for engine to start.
Recoil Starter
The starter handle is used to manually start the engine.
Electric Starter Button (If so equipped)
Pressing the electric starter button engages the
engine’s electric starter when plugged into a 120V
power source
Shave Plate
The shave plate maintains contact with pavement as
the snow thrower is propelled, allowing snow close to
pavement’s surface to be discharged.
Electric Starter Plug (If so equipped)
Requires use of a two-prong outdoor extension cord
(packed with the snow thrower) and a 120V power
source/wall outlet.
7
Categories | MTD Snow Blower Manuals, Snow Blower Manuals |
---|---|
Tags | MTD 230, MTD 240, MTD 250, MTD 260, MTD 261, MTD S230, MTD S240, MTD S250, MTD S260, MTD S261, MTD Snow Blower Manual |
Download File |
|
Document Type | Owner's Manual |
Language | English |
Product Brand | MTD, Snow Blower |
Document File Type | |
Publisher | mtdproducts.com |
Wikipedia's Page | MTD Products |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)