MTD 2N1 2P5 Single Stage Snow Blower Owners Manual

4
Auger Control
Recoil Starter
Know
Your Snow
Thrower
Gasoline  Cap
Chute Control  Handle
Chute
Oil Fill
Ignition Key
Assembly
Primer
Gasoline
Cap
Oil Fill
Throttle
Control
Electric
Starter
Button
WARNING
Choke
Shave Plate
Auger
Control
Electric
Be familiar with
Starter
Outlet
Oil Drain
all the controls on
the snow thrower
and their proper
operation.  Know how
to stop the machine
and disengage them
quickly.
Recoil
Starter
Figure 4-1
Choke Lever
Auger
Activating choke control closes the choke plate on
carburetor and aids in starting engine. Refer to the engine
manual packed with unit for more detailed instructions.
When engaged, the augers rotation draws snow into the
auger housing and throws it out the discharge chute.
Rubber paddles on the augers also aid in propelling  the
unit as they come in contact with the pavement.
Primer
Depressing primer forces fuel directly into engine’s
carburetor to aid in cold-weather starting. Refer to engine
manual packed with unit for more detailed instructions.
Auger Control Handle
Located on the upper handle, the auger control handle
is used to engage and disengage drive to the auger.
Squeeze the control handle against the upper handle to
engage auger; release it to disengage.
Ignition Key
The ignition key must be inserted and snapped  in place
in order for the engine to start. Remove the ignition key to    DischargeRefer to Set-Up. Chute / Chute Handle
prevent unauthorized use of equipment. Do NOT attempt
to turn the key.
Shave Plate
The shave plate maintains contact with pavement as
Recoil Starter
the snow thrower is propelled, allowing snow close to
pavement’s surface to be discharged.
The starter handle is used to manually start  the engine.
Electric Starter (If Equipped)
Used to start engine with a 120V power source.
NOTE:on the rightOn certainside ofmodelsthe  shroud.the electric starter is located
Plug for Electric Start
Requires use of a three-prong outdoor extension cord
and a 120V power source.
7
Product Specification
CategoriesMTD Snow Blower Manuals, Snow Blower Manuals
Tags, , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 32 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

One thought on “MTD 2N1 2P5 Single Stage Snow Blower Owners Manual

  1. I would like to order a set of 2 Rubber Paddle (part #38) and a set of 4 Spiral-Crescent (part #39) for my Single-Stage Snow Thrower – Model 2N1. Is there a way to order those by Internet?

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website