RULES FOR SAFE OPERATION
the engine until fuel vapors dissipate.
SYMBOL
MEANING
•
Move the unit at least 30 feet (9.1 m) from the fueling source and site
before starting the engine. Do not smoke. Keep sparks and open
flames away from the area while adding fuel or operating the unit.
WARNING:
result in injury to yourself and others. Always follow the
safety precautions to reduce the risk of fire, electric
shock and personal injury.
Failure to obey a safety warning can
WHILE OPERATING
•
•
•
•
Never start or run the unit inside a closed room or building.
Breathing exhaust fumes can be fatal. Operate this unit only in a
well-ventilated outdoor area.
Wear safety glasses or goggles that meet ANSI Z87.1 standards and
are marked as such. Wear ear/hearing protection when operating
this unit. Wear a face or dust mask if the operation is dusty.
Wear heavy long pants, boots, gloves and a long sleeve shirt. Do
not wear loose clothing, jewelry, short pants, sandals or go
barefoot. Secure hair above shoulder level.
The cutting attachment shield must always be in place while
operating the unit. Do not operate unit without both trimming
lines extended, and the proper line installed. Do not extend the
trimming line beyond the length of the shield.
This unit does not have a clutch. The cutting attachment
continues rotating when the engine is idling. If it does not, have
the unit adjusted by an authorized service technician.
Adjust the D-handle to your size in order to provide the best grip.
Be sure the cutting attachment is not in contact with anything
before starting the unit.
CAUTION:
in property damage or personal injury to yourself or to
others. Always follow the safety precautions to reduce
the risk of fire, electric shock and personal injury.
Failure to obey a safety warning may result
Read the Operator’s Manual and follow all warnings and safety
instructions. Failure to do so can result in serious injury to the
operator and/or bystanders.
FOR QUESTIONS, CALL 1-800-345-8746 IN U.S. OR
1-800-668-1238
in CANADA
•
READ ALL INSTRUCTIONS BEFORE OPERATING
IMPORTANT SAFETY INSTRUCTIONS •
•
WARNING:
When using the unit, you must follow the
safety rules. Please read these instructions before
operating the unit in order to ensure the safety of the
operator and any bystanders. Please keep these
instructions for later use.
•
•
•
Use the unit only in daylight or good artificial light.
•
•
•
•
Read the instructions carefully. Be familiar with the controls and
proper use of the unit.
Do not operate this unit when tired, ill or under the influence of
alcohol, drugs or medication.
Children under the age of 15 must not use the unit; teens may
operate the unit with adult guidance.
Inspect the unit before use. Replace damaged parts. Check for fuel
leaks. Make sure all fasteners are in place and secure. Replace cutting
attachment parts that are cracked, chipped or damaged in any way.
Make sure the cutting attachment is properly installed and securely
fastened. Be sure that the cutting attachment shield is properly attached,
and positioned as recommended. Failure to do so can result in personal
injury to the operator and bystanders, as well as damage to the unit.
Use only 0.080 inch (2.03 mm) diameter original equipment
manufacturer replacement line. Never use metal-reinforced line, wire,
chain or rope. These can break off and become dangerous projectiles.
• Avoid accidental starting. Be in the starting position whenever
pulling the starter rope. The operator and unit must be in a stable
position while starting. Refer to Starting/Stopping Instructions.
• Use the right tool. Only use this tool for its intended purpose.
• Do not overreach. Always keep proper footing and balance.
•
•
•
•
•
•
Always hold the unit with both hands when operating. Keep a
firm grip on both handles or grips.
Keep hands, face, and feet at a distance from all moving parts. Do
not touch or try to stop the cutting attachment when it rotates.
Do not touch the engine, gear housing or muffler. These parts get
extremely hot from operation, even after the unit is turned off.
Do not operate the engine faster than the speed needed to cut, trim
or edge. Do not run the engine at high speed when not cutting.
Always stop the engine when cutting is delayed or when walking
from one cutting location to another.
If you strike or become entangled with a foreign object, stop the
engine immediately and check for damage. Do not operate
before repairing damage. Do not operate the unit with loose or
damaged parts.
•
•
•
Be aware of risk of injury to the head, hands and feet.
Clear the area to be cut before each use. Remove rocks, broken
glass, nails, wire, string and other objects which may be thrown
or become entangled in the cutting attachment. Clear the area of
children, bystanders and pets; keep them outside a 50-foot
•
•
Stop the unit, switch the engine to off, and disconnect the spark
plug for maintenance or repair.
(15
thrown objects. Encourage bystanders to wear eye protection. If
you are approached, stop the unit immediately.
m.) radius, at a minimum. Even then, they are still at risk from
Use only original equipment manufacturer replacement parts and
accessories for this unit. These are available from your authorized service
dealer. Use of any unauthorized parts or accessories could lead to
serious injury to the user, or damage to the unit, and void your warranty.
•
•
Squeeze the throttle control and check that it returns automatically to
the idle position. Make all adjustments or repairs before using the unit.
This unit was not designed to be used as a brushcutter. Do not
attach or operate this unit with any type of brushcutting blade or
brushcutting attachment.
•
•
Keep unit clean of vegetation and other materials. They may
become lodged between the cutting attachment and shield.
To reduce fire hazard, replace a faulty muffler and spark arrestor.
Keep the engine and muffler free from grass, leaves, excessive
grease or carbon build up.
SAFETY WARNINGS FOR GAS TRIMMERS
•
Store fuel only in containers specifically designed and approved
for the storage of such materials.
Always stop the engine and allow it to cool before filling the fuel
OTHER SAFETY WARNINGS
•
•
•
Never store a fueled unit inside a building where fumes may
•
reach an open flame or spark.
WARNING:
Gasoline is highly flammable, and its
vapors can explode if ignited. Take the following
precautions:
Allow the engine to cool before storing or transporting. Be sure
to secure the unit while transporting.
Store the unit in a dry area, locked up or up high to prevent
unauthorized use or damage, out of the reach of children.
tank. Never remove the fuel tank cap or add fuel when the engine is
hot. Never operate the unit without the fuel cap securely in place.
Loosen the fuel tank cap slowly to relieve any pressure in the tank.
• Never douse or squirt the unit with water or any other liquid.
Keep handles dry, clean and free from debris. Clean after each
use, see Cleaning and Storage instructions.
•
Add fuel in a clean, well-ventilated outdoor area where there are
no sparks or flames. Remove the fuel cap slowly, and only after
the engine stops. Do not smoke while fueling or mixing fuel. Wipe
up any spilled fuel from the unit immediately.
• Keep these instructions. Refer to them often and use them to
instruct other users. If you loan someone this unit, also loan them
these instructions.
•
Avoid creating a source of ignition for spilled fuel. Do not start
SAVE THESE INSTRUCTIONS
2
| Categories | Bolens Trimmer Manuals, Lawn Mower Manual, MTD Lawn Mower Manuals, MTD Trimmer Manuals, Trimmer Manuals |
|---|---|
| Tags | Bolens BL100, Bolens BL150, MTD BL100 MTD BL150 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | MTD, Lawn Mower |
| Product Type | Walk Behind Mower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)