MTD Troy-Bilt LS 27 TB Log Splitter Lawn Mower Owners Manual

3
Setting Up
Your Log
Splitter
WARNING: Use extreme  caution
unpacking this machine. Some
components are very heavy  and will
require additional people  or mechanical
handling equipment.
NOTE: All references in this manual to the left or right
side of the log splitter is from the operating  position only.
Exceptions, if any, will be specified.
NOTE: Many of the following items may already be
assembled when you receive this unit. If this is the  case,
proceed to the next steps where applicable.
Assembling the Tongue
Attaching the Jack Stand
The jack stand is shipped in the transport  position.
Figure 3-1
1.
Remove the spring clip and clevis pin and pivot
the jack stand towards the ground to the operating
position.
WARNING
2.
Secure the jack stand in position with the  clevis pin
and spring clip. See Figure 3-1.
Use extreme cau-
tion unpacking this
machine. Some
Attaching the Tongue
1.
With the log splitter still standing upright,  remove two
hex bolts and hex nuts from the tank bracket. See
Figure 3-2.
components are very
heavy and will require
additional people or
mechanical handling
equipment.
2.
Align the holes in the tongue with the holes in  the tank
bracket and secure with hardware just removed. See
Figure 3-2.
NOTEassembly.: High pressure hose must be above the tongue
Connecting Cylinder to Beam
The log splitter is shipped with the beam  in the vertical
position.
1.
2.
Pull out the vertical beam lock, rotate it back,  and
pivot the beam to the horizontal position until it locks.
See Figure 3-3.
Figure 3-2
NOTE:  This Operators
Manual covers a range
of product specifications
for various models.
Disconnect the dislodger from the  beam weld bracket
by removing the six hex screws. See Figure 3-4.
Characteristics and
features discussed
B
and/or illustrated in
this manual may not be
applicable to all models.
MTD LLC reserves the
right to change product
specifications, designs
and equipment without
notice and without incur-
ring obligation.
2
1
A
Figure 3-3
Figure 3-4
6
Product Specification
CategoriesLawn Mower Manual, MTD Lawn Mower Manuals, Troy-Bilt Lawn Mower Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 40 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Lawn Mower
Product TypeWalk Behind Mower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website