ASSEMBLY INSTRUCTIONS
HANDLE ASSEMBLY
Self-Tapping
Screws
Bolts
1.
Remove the unit from the box.
2.
Place the 2-holed end of the straight metal shaft over the
shaft base on the unit and align the holes (Fig. 1).
3.
4.
5.
Insert the two self-tapping screws (1/4” x 1-1/4”) into these
holes (Fig. 1).
Using a 3/8” wrench, screw each self-tapping screw into
the shaft until firm. DO NOT OVERTIGHTEN.
Insert the control handle onto the 3-holed end of the
straight metal shaft and align the control handle’s holes
with the two end holes of the straight metal shaft (Fig. 2).
Lock-Nuts
NOTE: Because the control cables are pre-installed, care must
be taken when installing the control handle to not pinch or
bend the cables. This can damage them and cause them
to function improperly.
Fig. 1
Fig. 2
6.
Insert the two screws (1/4” x 1-1/2”) into the recessed hex
holes on the handle (Fig. 2) and hold in place.
Starter Rope Handle
Eye Hook
7.
8.
Hand-start the lock-nuts onto these bolts.
Using a 7/16” wrench, tighten each nut onto each bolt until
firm.
9.
Pull out the starter rope and run it into the eye hook (Fig. 3).
10.
Insert the eye hook into the remaining hole on the straight
metal shaft (Fig. 3).
Starter Rope
11.
12.
Screw the nut onto the eye hook (Fig 3) and use a 7/16”
wrench to tighten. DO NOT OVERTIGHTEN.
Using the zip tie in the hardware bag, secure the handle
cables to the straight metal shaft mid-way between the eye
hook and the motor housing.
Lock-Nut
Fig. 3
5
| Categories | Lawn Mower Manual, MTD Lawn Mower Manuals, Troy-Bilt Lawn Mower Manuals |
|---|---|
| Tags | MTD Troy-Bilt TBE515 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | MTD, Lawn Mower |
| Product Type | Walk Behind Mower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(3 votes, average: 2 out of 4)
Lawn and Garden readers have rated MTD Troy-Bilt TBE515 4 Cycle Lawn Edger Lawn Mower Owners Manual 2.0 out of 4.0 based on 3 product reviews. The manual tells you everything except HOW TO CHANGE THE BELT on the model TBE515
Easy to find parts and order them!
A total piece of junk; burns oil & engine seizes. Had to replace belt after second use. I invest in many lawn products but never again anything with a Troy-Bilt sticker!!!!!!!!!!!!!!!!