RULES FOR SAFE OPERATION
•
•
Inspect all extension cords and the unit power
connection periodically. Look closely for deterioration,
cuts or cracks in the insulation. Also inspect the
connections for damage. Replace the cords if any
defects or damage appear.
• Do not operate the engine faster than the speed
needed to do the job. Do not run the engine at high
speed when not in use.
•
Always stop the engine/motor when operation is
delayed or when walking from one location to another.
Prevent disconnection of the turbo blower powerhead
from extension cord during operation by using a plug-
receptacle retaining strap, connector, or by making a
knot as shown below:
.•
If you strike or become entangled with a foreign object,
stop the engine/motor immediately and check for
damage. Have any damage repaired before attempting
further operations.
Extension
Cord
Turbo Blower
Cord
Extension
Cord
Turbo Blower
Cord
•
Stop the unit IMMEDIATELY if you feel excessive
vibration. Vibration is a sign of trouble. Inspect
thoroughly for loose nuts, bolts or damage before
continuing. Repair or replace affected parts as
necessary.
•
Avoid dangerous environments. Never operate your
unit in damp or wet conditions. Moisture is a shock
hazard.
• Stop and switch the unit to off for maintenance, repair,
or for changing add-ons or other attachments. The unit
must be stopped and the impeller no longer turning to
avoid injury.
•
•
•
Do not use the unit in the rain. Do not use in or around
water.
• Use only genuine factory replacement parts and
accessories for this unit. These are available from
your authorized service dealer. Use of any unauthorized
parts or accessories could lead to serious injury to the
user or damage to the unit, and void your warranty.
Do not handle the plug or unit with wet hands or
standing on any wet surfaces.
Do not leave the unit plugged in when not in use,
changing attachments or add-ons, or while being
serviced.
OTHER SAFETY WARNINGS
•
Allow the unit to cool before storing or transporting. Be
sure to secure the unit while transporting.
WHILE OPERATING
•
Keep bystanders, especially children and pets, at least
50 ft (15 m) away.
•
Store the unit in a locked up and dry or high and dry
place to prevent unauthorized use or damage, out of
the reach of children.
•
Wear safety glasses or goggles that are marked as
meeting ANSI Z87.1 standards, and ear/hearing
protection when operating this unit. Wear a face or
dust mask if the operation is dusty.
•
Never douse or squirt the unit with water or any other
liquid. Keep handles dry, clean and free from debris.
Clean unit and labels with a damp sponge. Clean after
each use.
•
Wear heavy, long pants, boots, gloves and a long
sleeve shirt. Do not wear loose clothing, jewelry, short
pants, sandals or go barefoot. Secure hair above
shoulder level.
•
•
Keep these instructions. Refer to them often and use
them to instruct other users. If you loan someone this
unit, also loan them these instructions.
•
•
Use the unit only in daylight or good artificial light.
Only qualified personnel should perform any repairs
or maintenance procedures that are not described
in this manual.
Use the right tool. Only use this tool for the purpose
intended.
•
•
Do not overreach, take extra care when working on
steep slopes or inclines. Always keep proper footing
and balance.
• Check engine mounting bolts and other bolts at
frequent intervals for proper tightness to be sure the
equipment is in safe working condition.
Always hold the unit with both hands when operating.
Keep a firm grip on both the front and rear handle or
grips.
• Inside a building store the machine away from ignition
sources. Allow the engine to cool before storing in any
enclosure.
•
•
•
Keep air intake opening clear of debris while blowing.
Never operate the unit without the a nozzle installed.
• Always refer to the Operator’s Manual instructions for
important details if the unit is to be stored for an
extended period.
Never attempt to clear a clogged nozzle with the
engine/motor running.
•
Do not attempt to repair the machine unless you have
the proper tools, and instructions for disassembly and
repair of the machine.
•
Do not force unit. It will do the job better and with less
likelihood of injury at a rate for which it was designed.
SAVE THESE INSTRUCTIONS
4
| Categories | MTD Snow Blower Manuals, Snow Blower Manuals, Troy Bilt Snow Blower Manuals |
|---|---|
| Tags | MTD Snow Blower Manual, MTD TBTB Turbo, Troy Bilt TBTB Turbo |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | MTD, Snow Blower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)