Simplicity 555 755 1693646 1693647 1693648 1693649 Series Snow Blower Owners Manual

Regular Maintenance
LUBRICATION
IMPORTANT NOTE
It  is very  important  that  grease  fittings  on the  auger
shaft  are lubricated  regularly.  If  auger rusts  to  shaft,
damage to  worm gear  may occur if  shear pins  do not
break.
To prevent wheels rusting to  axles, it is also necessary
to remove the wheels and grease the axles regularly.
There are two grease fittings on the auger shaft (Figure
18).
Wipe the fittings clean and apply grease, using a
grease gun. Also apply grease on other points indicated.
Apply medium weight (10W) oil to points shown(See
Figures 17 - 19).
Generally, all moving metal parts should be oiled where
contact is made with other parts. Keep oil and grease off
belts, pulley grooves, drive disc, and friction disc.
See lubrication notes at bottom of page.
Figure 18.  Snowthrower General Lubrication Points
Drive Disc
Friction Disc
Figure 19.  Chute Control Rod Gears
Figure 17.  Drive Area Lubrication Points
(Bottom Cover Removed)
LUBRICATION NOTES:
1.
Grease locations indicated by grease gun symbol:
Use grease fittings when present. Disassemble parts to apply grease to moving parts when grease fittings
are not installed.
2.
Oil locations indicated by oil can symbol:
Do not allow oil to drip onto traction drive or friction disc.
14
Product Specification
CategoriesSimplicity Snow Blower Manuals, Snow Blower Manuals
Tags, , , , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 30 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandSimplicity, Snow Blower
Document File TypePDF
Publishersimplicitymfg.com
Wikipedia's PageSimplicity Outdoor
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website