English / USA
STIHL AutoCut
Hold the rotating mowing head
:
above the ground – tap it on the
ground once – about 1 1/4" (3 cm)
fresh line is advanced.
The blade on the deflector trims
overlong line to the correct length –
avoid tapping head more than once at a
time.
Line feed operates only if both lines
still have a minimum length of 1"
(
2.5 cm).
All other mowing heads
Refer to the instructions supplied with
the mowing head.
To reduce the risk of injury, always
shut off the engine before adjusting
the nylon line by hand.
Mounting Metal Cutting Tools
:
Lay your machine on its back with
the gearhead facing upward.
Remove the skirt and blade from
the mowing head deflector before
mounting
grass cutting blade 230-4 (1),
grass cutting blade 230-8 (2),
or brush knife (3) – see “Mounting
the Deflector”
Cutting edges of (1) and (3) may
point in either direction.
Replacing Nylon Line or Cutting
Blades
Cutting edges of (2), (4) and (5)
must point clockwise.
Refer to the instructions supplied with
the mowing head.
Direction of rotation is marked by
arrow on inside of cutting head
deflector or limit stop.
Fit the appropriate limit stop before
mounting the circular saw blade 200
(
4,5) – see “Mounting the Deflector”.
FS-KM
21
| Categories | Hedge Trimmer Manuals, STIHL Hedge Trimmer Manuals, Trimmer Manuals |
|---|---|
| Tags | STIHL FS, STIHL KM |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Trimmer |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)