English / USA
Information
Before You Start
The chain brake is designed to be
activated also by the inertia of the
front hand guard
Chain brake maintenance
The chain brake is subject to normal
wear. It is necessary to have it serviced
and maintained regularly by trained
personnel, such as your STIHL servicing
dealer, at the following intervals:
STOP
if the forces are sufficiently high. The
hand guard is accelerated toward the
bar nose - even if your left hand is not
behind the hand guard, e.g. during a
felling cut. The chain brake will operate
only if it has been properly maintained
and the hand guard has not been
modified in any way.
Full-time professional
users:
every 3
months
0 = Engine off –
ignition is switched off
Semi-professional
users (in agriculture
and construction):
#
= Normal run position –
engine runs or can fire
Check operation of chain brake
every 6
months
Before starting work:
n=Starting throttle position –
this position is used to start the
engine. The Master Control lever
moves to the normal run position as
soon as the throttle trigger is
squeezed.
Run engine at idle speed, engage the
chain brake (push hand guard toward
bar nose). Accelerate up to full throttle
for no more than 3 seconds – the chain
must not rotate. The hand guard must be
free from dirt and move freely.
Hobby and
occasional users:
every 12
months
To move the Master Control lever from #
to n, press down the throttle trigger
interlock and squeeze the throttle trigger
at the same time.
28
MS 192 T, MS 192 TC
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 192 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)