English / USA
Storing the Machine
Checking and Replacing
Chain Sprocket
For periods of about 3 months or longer:
:
:
Disengage the chain brake:
Pull hand guard toward the
handlebar.
Removing
:
Drain and clean the fuel tank in a
well ventilated area.
Remove chain sprocket cover,
chain and guide bar.
:
Dispose of remaining fuel and
cleaning solution properly in
accordance with local
Replace the chain sprocket:
environmental requirements.
:
:
:
:
:
Run engine until carburetor is dry,
this helps prevent the carburetor
diaphragms sticking together.
Remove the saw chain and guide
bar, clean them and spray with
corrosion inhibiting oil.
:
Pull off the spark plug boot (1) and
unscrew the spark plug (2).
Thoroughly clean the unit,
pay special attention to the cylinder
fins and air filter.
–
–
after using two Oilomatic chains or
sooner
If you use a biological chain and bar
lubricant, e.g. STIHL BioPlus,
completely fill the chain oil tank.
if the wear marks (arrow) on the
sprocket are deeper than approx.
Store the unit in a dry and high or
locked location, out of the reach of
children and other unauthorized
persons.
0.02
in (0.5 mm) since this would
reduce the life of the chain. Use a
gauge (special accessory) to check
the depth of the wear marks.
:
:
Push the locking strip (3) – narrow
end first – into the cylinder and then
turn it 180°.
It is best to use two chains in
rotation with one sprocket.
STIHL recommends the use of original
STIHL sprockets to ensure correct
operation of the chain brake.
Rotate clutch clockwise as far as
stop.
MS 192 T, MS 192 TC
43
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 192 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)