English / USA
Replacing Starter Rope
and Rewind Spring
Replacing the starter rope
1
1
1
1
:
:
Coat rope rotor bearing bore with
non-resinous oil.
:
:
Remove the screws (1).
Slip rotor over starter post – turn it
back and forth to engage anchor
loop of rewind spring.
Ease fan housing away from
crankcase and remove it sideways.
:
:
Refit the pawl (4) in the rotor.
Fit the washer (3) on the starter
post.
:
Use screwdriver or suitable pliers to
install spring clip (2) on starter post
and engage it on the pawl's peg –
the spring clip must point clockwise
:
:
Ease the cap (5) out of the starter
grip.
Remove remaining rope from the
rotor and grip – make sure the
sleeve is not pushed out of the grip.
–
see illustration.
:
:
Use screwdriver or suitable pliers to
carefully remove spring clip (2) from
the starter post.
:
Tie a simple overhand knot in the
new rope and then thread it through
the top of the grip and the rope
bushing (6).
Carefully remove the rope rotor with
washer (3) and pawl (4).
:
:
Refit the cap in the grip.
The rewind spring may pop out and
uncoil during this operation.
Thread the rope through the rotor
and secure it with a simple
overhand knot.
38
MS 200 T
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 200 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)