English / USA
Storing the Machine
Checking and Replacing
Chain Sprocket
For periods of about 3 months or longer:
:
:
Remove the chain sprocket cover,
chain and guide bar.
Disassembly
:
Drain and clean the fuel tank in a
well ventilated area.
Disengage the chain brake:
Pull hand guard toward the front
handle.
:
Dispose of remaining fuel and
cleaning solution properly in
accordance with local
Replace the chain sprocket:
environmental requirements.
:
:
:
:
:
Run engine until carburetor is dry,
this helps prevent the carburetor
diaphragms sticking together.
Remove the saw chain and guide
bar, clean them and spray with
corrosion inhibiting oil.
:
Pull off the spark plug boot and
unscrew the spark plug (1).
Thoroughly clean the unit,
pay special attention to the cylinder
fins and air filter.
–
–
after using two Oilomatic chains
If you use a biological chain and bar
lubricant, e.g. STIHL BioPlus,
completely fill the chain oil tank.
or sooner if the wear marks (arrows)
on the sprocket are deeper than
approx. 0.02 in (0.5 mm) since this
would reduce the life of the chain.
You can use a gauge (“Special
Accessories”) to check the depth of
the wear marks on sprockets.
Store the unit in a dry and high or
locked location, out of the reach of
children and other unauthorized
persons.
:
:
Push the locking strip (2) – wide end
first – into the cylinder and then turn
it 180° clockwise.
Rotate clutch clockwise as far as
stop.
It is best to use two saw chains in
rotation with one sprocket.
Use only original STIHL chain sprockets
to ensure correct operation of the chain
brake.
40
MS 200 T
Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
---|---|
Tags | STIHL MS 200 |
Download File |
|
Language | English, Español |
Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
Document File Type | |
Publisher | stihl.com |
Wikipedia's Page | Stihl |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)