english / USA
a)
–
saws with a displacement of less
angles that may occur in real life cutting
situations. Compliance with § 5.12 of
ANSI B 175.1-2000 does not automatic-
ally mean that in a real life kickback the
bar and chain will rotate at most 45°.
Devices for reducing the risk of
kickback injury
STIHL recommends the use of the
STIHL Quickstop chain brake on your
power-head with green labeled reduced
kickback bars and low kickback chains.
than3.8 cubic inches
must, in their original condition,
meet a 45° computer derived
kickback angle when equipped with
certain cutting attachments.
and must be equipped with at least
two devices to reduce the risk of
kickback injury, such as a chain
brake, low kickback chain, reduced
kickback bar, etc.
!
Warning!
–
In order for powerheads below 3.8 cubic
inch displacement to comply with the
computed kickback angle requirements
of § 5.12 of ANSI B 175.1-2000 use only
the following cutting attachments:
!
Warning!
To reduce the risk of injury, stop using
the saw immediately if the chain brake
does not function properly. Take the saw
to your local STIHL Service Center! Do
not use the saw until the problem has
been rectified (see the section "Chain
Brake").
–
bar and chain combinations listed
as complying in the "Specifications"
section of the Owner's Manual or
b)
–
saws with a displacement of
3.8
cubic inches and above
must be equipped with at least one
device designed to reduce the risk
of kickback injury such as a chain
brake, low kickback chain, reduced
kickback bar, etc.
–
other replacement bar and chain
combinations marked in
Quickstop chain brake
accordance with the standard for
use on the powerhead or
STIHL has developed a chain stopping
system designed to reduce the risk of
injury in certain kickback situations. It is
called a Quickstop chain brake. The
Quickstop is available as standard
–
replacement chain designated
The computer derived angles for saws
below 3.8 cubic inch displacement are
measured by applying a computer
program to test results from a kickback
test machine.
"low kickback saw chain''.
See the section on "Low kickback saw
chain and reduced kickback bars"
equipment on your STIHL chainsaw and
is available for installation on most older
STIHL saws. Ask your dealer to retrofit
your older model saw with a chain brake.
!
Warning!
The computer derived angles of § 5.12
of ANSI B 175.1-2000 may bear no
relationship to actual kickback bar
rotation
16
MS 360 C
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 360 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)