english / USA
The chain brake is activated by
the inertia of the front hand guard
Check operation of hand guard
activated function of chain brake
if the kickback force of the saw is high
Before starting work: Run engine at idle
speed, engage the chain brake (push
hand guard toward bar nose). Open the
throttle wide for no more than 3 seconds.
The chain must not rotate. The hand
guard must be free from dirt and move
freely.
enough.
The hand guard is accelerated toward
the bar nose – even if your left hand is
not behind the hand guard, e.g. during
felling cut.
Chain brake is activated by front
hand guard
The chain brake will operate only if the
hand guard has not been modified in any
way.
In case of any doubt about the above
functions, contact your STIHL dealer for
assistance.
:
When the hand guard is pushed
toward the bar nose by the left hand
or by inertia in certain kickback
situations.
Check operation of interlock lever
activated function of chain brake
The chain is brought to a standstill and
Before starting work:
locked in position.
Open the throttle fully and then release
the rear handle. The chain must stop
moving within less than a second.
Disengaging the chain brake
:
Pull the hand guard toward the front
handle.
34
MS 360 C
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 360 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)