English / USA
Operating Instructions
If the engine doesn’t start:
:
:
:
Unscrew and dry off the spark plug.
During break-in period
Set the Master Control lever to $
If you did not move the Master Control
lever from cold start l to warm start n
quickly enough after the engine began to
fire, the combustion chamber is flooded.
A factory new machine should not be run
at high revs (full throttle off load) for the
first three tank fillings. This avoids
unnecessary high loads during the
break-in period. As all moving parts
have to bed in during the break-in
period, the frictional resistances in the
engine are greater during this period.
The engine develops its maximum
power after about 5 to 15 tank fillings.
Crank the engine several times with
the starter to clear the combustion
chamber.
:
Install the spark plug and connect
the spark plug boot (press it down
firmly) – fit the carburetor box
cover.
:
:
:
Set Master Control lever to n –
even if engine is cold.
Do not make the mixture leaner to
achieve an apparent increase in
power – this could damage the
engine – see “Adjusting
Press in button to open the
decompression valve.
Now start the engine.
Carburetor”.
:
:
Use the combination wrench to
open the fasteners (1) in the
direction of the arrows.
Always disengage the chain brake
before opening the throttle. Running
the engine at higher revs with the
chain brake engaged (saw chain at
a standstill) will quickly damage the
engine and chain drive (clutch,
chain brake).
Remove carburetor box cover (2).
:
Pull off the spark plug boot (3).
MS 441 C
41
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 441 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)