English / USA
Adjusting Idle Speed
Erratic idling behavior, poor
acceleration
(although L screw is open 1/4 turn)
Fine Tuning for Operation at High
Altitude
A slight correction of the setting may be
necessary if engine power is not
satisfactory when operating at high
altitude:
:
:
Check the standard setting.
Warm up the engine.
Turn the high speed screw (H) clockwise
(leaner) – no further than stop.
Engine stops while idling
or chain runs while engine is idling
If the setting is too lean there is
a risk of engine damage due to
insufficient lubrication and
overheating.
Idle setting is too lean:
Turn low speed screw (L)
counterclockwise – no further than
stop – until the engine runs and
accelerates smoothly .
:
:
Check the standard setting.
:
Turn the idle speed screw (LA)
slowly clockwise – as far as stop or
until the chain begins to run – then
1
turn the screw back 1 /2 turn.
It is usually necessary to change the
setting of the idle speed screw (LA)
after every correction to the low speed
screw (L).
If the chain continues moving when
the engine is idling, have your saw
checked and repaired by your
servicing dealer.
MS 441 C
47
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 441 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)