English / USA
Please note that the following maintenance intervals apply for normal
operating conditions only. If your daily working time is longer than normal or
cutting conditions are difficult (very dusty work area, resin-rich wood,
tropical wood etc.), shorten the specified intervals accordingly. If you only
use the saw occasionally, extend the intervals accordingly.
Cooling inlets
Clean
Clean
Clean
X
X
Cylinder fins
X
Prefilter channel and carburetor body
X
X
Shutter, “preheat carburetor”, and preheating
channel
Clean (winter only)
Check idle adjustment – chain must not rotate
Readjust idle
X
X
Carburetor
Spark plug
X
X
Readjust electrode gap
X
X
Replace after 100 hours of operation
All accessible screws and nuts
(not adjusting screws) 2)
Retighten
Inspect
Spark arresting screen* in muffler
Cumbustion Chamber
Clean or replace
X
X
Decarbonizing after 139 hours of operation,
then every 150 hours of operation
X
X
Check
X
Chain catcher
Safety label
Replace
Replace
1)
STIHL recommends that this work
be done by a STIHL servicing dealer
Firmly tighten cylinder base screws
of professional saws (3.4 kW or
more) after 10 to 20 hours of
operation
2)
*
see “Guide to Using this Manual“
58
MS 441 C
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 441 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)