20.Make
sure that marker lines (Fig. 36) on installed
24.Install the piston spring (item 4), backup seal (item 5)
and then O–ring seal (item 6) into the end cover.
components are aligned. Also, make sure that bolt holes
through components are aligned. If parts need re–align-
ment, make sure that drive link end still protrudes above
the surface of the manifold.
25.Line
up the piston alignment pin and then press pis-
ton (item 7) into the end cover.
26.Lower
care to keep piston in end cover.
the end cover assembly onto the motor taking
21.With
the metal side of the commutator seal (item 8)
facing up, use finger pressure to press the commutator
seal down into the commutator. The seal should be flush
with the commutator surface.
27.Install
four (4) screws to secure the motor assembly.
Torque screws 10 ft–lb (13.6 N–m) to seat all compo-
nents. Then torque screws in a crossing pattern to50 ft–
lb (67 N–m).
22.Place
and then place the commutator onto the protruding end
of the drive link making sure that the seal side faces up.
the commutator container onto the manifold
23.Install
the final body seal (item 3) into the groove in
the face of the end cover.
Topdresser 1800 & 2500
Page 3 – 43
Hydraulic System
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Manualpdresser 1800, Toro Manualpdresser 2500 |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)