Toro 07154SL Service Manualpdresser 1800 2500 Preface Publication

NOTE:  The rear roller has a textured surface and has
a key slot for the drive sprocket.
NORMAL ROTATION DIRECTION
1
2.
Position roller  to frame.  Secure bearings to  frame
with four (4) screws and lock washers.
3.
pulley groove in roller aligns with slot in slider bed.
Center roller between bearings. Also, make sure that
NOTE:  Normal roller  rotation is  clockwise as  viewed
from left side of machine (Fig. 9).
4.
collars in the direction of normal roller rotation to tighten
collars.
Using a punch and hammer,  rotate bearing locking
2
FRONT
Figure 9
1.
Brush
2.   Rear conveyor roller
5.
Apply Loctite #242 (or equivalent) to threads of lock-
ing collar  set screws (item 22).  Install and tighten  set
screws to secure locking collars to roller shaft.
6.
Check that roller is free to rotate and no binding ex-
ists.
7.
If rear roller  was removed, install  sprocket spacer,
square key and then sprocket to roller shaft. Make sure
that hub side of sprocket is outward (away from frame)
and that sprocket is tight against spacer and roller. Apply
Loctite #242  (or equivalent)  to threads  of set  screws
(item 3). Install set  screws to secure sprocket to roller
shaft.
8.
Install  conveyor  belt to  machine  (see  Operator’s
Manual):
A.  Install conveyor belt to machine. Make sure that
the guide on the underside of the belt is positioned in
both roller grooves and also is routed in the slider bed
frame cut–out.
B.  Tighten fasteners that secure slider bed to frame.
C. Pivot hopper down to slider bed and secure with
removed fasteners.
D. Connect   conveyor  drive   chain  to   sprockets.
Check that conveyor drive chain has 0.125” (3.2 mm)
deflection at mid–span between sprockets. If neces-
sary,  reposition  conveyor  motor  to  allow  correct
chain deflection.
E.  Install chain guard (Figs. 6 and 7).
F.  Adjust tension on conveyor belt.
Lubricate grease fittings on roller bearings.
9.
Chassis
Page 5 – 10
Topdresser 1800 & 2500
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 100 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website