If you leave the snowthrower plugged into a
power outlet, someone can inadvertently start
the snowthrower and injure people or damage
property.
Unplug the power cord whenever you are not
starting the snowthrower.
Figure28
StoppingtheEngine
2. To stop the traction drive, release the traction lever.
3.
Check to ensure that the speed selector operates
properly:
1.
Move the throttle to the Stop position (Figure 26).
•
If the snowthrower does not move or moves
forward when it is in Position R1, remove the
trunnion from the speed selector lever, turn the
trunnion downward (clockwise) on the speed
control rod, then install the trunnion.
•
If the snowthrower does not move or moves
rearward when it is in Position 1 (forward), remove
the trunnion from the speed selector lever, turn the
trunnion upward (counterclockwise) on the speed
control rod, then install the trunnion.
Figure26
Note: Refer to Installing the Traction Control
Linkage.
2.
3.
Wait for all moving parts to stop before leaving the
operating position.
Note: If the snowthrower moves when the
traction lever is in the released position, check the
traction cable (refer to Checking and Adjusting
the Traction Cable) or take the snowthrower to an
Authorized Service Dealer for service.
Close the fuel shutoff valve by rotating it clockwise
(Figure 27).
OperatingtheSpeedSelector
The speed selector has 6 forward and 2 reverse gears. To
change speeds, release the traction lever and shift the speed
selector lever to the desired position (Figure 29). The lever
locks in a notch at each speed selection.
Figure27
4.
Pull the recoil starter 3 or 4 times. This helps prevent
the recoil starter from freezing up.
OperatingtheTractionDrive
Important: To operate the traction drive, you
must operate the snowthrower with the self-propel
feature engaged. Refer to Freewheeling or Using the
Self-propel Drive.
Figure29
OperatingtheAuger/Impeller
Drive
1.
To engage the traction drive, squeeze the left hand
(traction) lever to the handgrip (Figure 28).
1. To engage the auger/ impeller drive, squeeze the right
hand (auger/ impeller) lever to the handgrip (Figure 30).
12
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38635, Toro Power Max 828LE |
| Model Number | 38635 |
| Model Year | 2007 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 270000001 - 270999999 |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | LH318SA-156564H |
| Engine Motor Size | 318cc |
| Engine Motor Type | 4 Cycle, 4 Cycle CARB2, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Lawn and Garden readers have rated Toro Power Max 828LE 38635 Snow Blower Operators Manual, 2007 4.0 out of 4.0 based on 1 product reviews. Love the snow blower just need the Manuel