Toro Power Max 828LE 38635 Snow Blower Operators Manual, 2007

Note: If you do not have a torque wrench, tighten
Note: The latch is spring loaded and will naturally
the plug firmly.
move into the teeth of the gear (Figure 49).
4.
Remove any slack in the cable by pulling the cable
conduit rearward.
AdjustingtheDischargeChute
Latch
5.
6.
Tighten the bolt on the cable clamp.
Install and secure the gear cover.
If the discharge chute does not lock into the desired
position or does not unlock so that you can move it to
another position, adjust the discharge chute latch.
ReplacingtheDriveBelts
1.
Remove the fastener on the gear cover (Figure 47), lift
the front of the cover up, and slide it back and out of
the way.
If the auger/impeller drive belt or the traction drive belt
becomes worn, oil-soaked, or otherwise damaged, go to
www.Toro.com for additional service information or have
an Authorized Service Dealer replace the belt.
ReplacingtheHeadlightBulb
Use a GE 892 16W halogen light bulb. Do not touch the
bulb with your hands or allow dirt or moisture to come into
contact with the bulb.
1.
Remove the wire connector from the back of the
headlight (Figure 50).
Figure47
2.
Loosen the bolt on the cable clamp (Figure 48).
Figure50
2.
Turn the base of the bulb counterclockwise until it
stops (Figure 51).
Figure48
1.
Cableconduit
2.
Cableclamp
3.
Grasp the cable conduit and move it toward the front of
the machine until the discharge chute latch fully engages
the gear teeth (Figure 48 and Figure 49).
Figure51
3.
Remove the bulb straight out from the back of the
headlight (Figure 52).
Figure49
1.
Dischargechutelatch
2.
Gearteeth
19
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags,
Model Number38635
Model Year2007
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 28 pages
Document TypeOperator's Manual
LanguageEnglish
Serial Number270000001 - 270999999
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Swath28 inch
DischargeTwo Stage
Engine ManufacturerTecumseh
Engine Oil Type26 oz. (.8l) 5w-30 or 10w / API SH or higher
Gearbox Lubricant4.5 oz. (133ml) SAE 90 GL5 or higher
Engine Motor Model #LH318SA-156564H
Engine Motor Size318cc
Engine Motor Type4 Cycle, 4 Cycle CARB2, EPA2
Transmission Speed6 Forward/2 Reverse
Transmission TypeFriction Disc
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(1 votes, average: 4 out of 4)
Lawn and Garden readers have rated Toro Power Max 828LE 38635 Snow Blower Operators Manual, 2007 4.0 out of 4.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Toro Power Max 828LE 38635 Snow Blower Operators Manual, 2007 SKU UPC Model
Frank Scioli on Mar 14, 2018. Toro 828 LE

Love the snow blower just need the Manuel


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website