Auger Gearbox Service
7.
Apply a VERY light coat of Loctite™ Blue #242 or
quivalent to the outer diameter of the bearing.
Loctite™ should not squeeze out when everything
is tightened (Figure 33).
10. All models. Apply a light coat of oil or anti-seize to
the gear case screws. Tighten them in an X
pattern to 120 in/lbs. (15kg/m) (Figure 34).
Note: Some models have 8 gear case screws;
others have 9.
9
5
3
2
1
7
8
4
Figure 33
2773-059
6
8.
9.
Some models use a gasket and some do not. For
those with a gasket use a small amount of grease
to stick the open ends of the gasket in place
during assembly. Otherwise this gasket is
intended to seal to a clean dry surface.
Figure 34
MVC-709
11. Fill the gearbox with lubricant. See the chart on
Introduction page 1 for the proper lubricant for
your model.
The 824XL seals in a different manner. The
mating surfaces must be clean and dry. Then a
thin coat of Hylomar (Toro PN 505-129) is applied
to BOTH halves. Allow it to cure until it is dull and
tacky, 15 minutes or so, then assemble.
Two Stage Snowthrower Drive Systems Manual
1 - 11
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38051, Toro 38052, Toro 38053, Toro 38054, Toro 521, Toro 522, Toro 824 |
| Model Number | 38051, 38051 38052 38053 38054 38062 38605 38607 |
| Model Year | 1990, 1991, 1992, 1993, 1994, 1995, 2000, 20012002, 2003 |
| Download File |
|
| Document Type | Service Manual |
| Language | English, Français |
| Serial Number | 210000001 - 210999999 |
| Product Name | 522, 622, 38062 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Intermediate Frame |
| Swath | 22 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 21 oz. (.62l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | 7 oz. (198gm) Lubriplate MAG-1 |
| Engine Motor Model # | HSSK50-67401S |
| Engine Motor Size | 5 hp |
| Engine Motor Type | 4 Cycle CARB1, EPA1 |
| Transmission Speed | 3 Forward/1 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)