Traction Drive Systems
ASSEMBLY — TORO MODELS 38066,
38078, 38083, 38084, 38086
4.
When installing the traction shaft and friction
wheel, the bearings must be aligned. Loosely
install the assembly into the chassis. Rotate the
friction wheel and firmly strike each bearing a
couple of times with a rubber mallet (Figure 120).
The jolt will center the bearings. Secure the
bearings to the chassis side plates.
Reverse the process for assembly. See the following
tips for special information.
1.
Lightly grease the axle gear. Spread about
½ teaspoon of #2 general-purpose grease around
the circumference of the gear (Figure 119).
Excess grease will just fling off when the machine
is driven.
Figure 120
2768-019
5.
The rod that is welded to the slider must slip into
the end of the shift arm assembly (Figure 121).
Figure 119
2768-017
2.
3.
Lightly oil the drive chain with chain oil. If engine
oil is used, coat the chain then wipe the excess
off. As with the grease, the sprockets turning will
fling any excess oil around the drive system.
2
The drive plate must be clean and free of oil. Wipe
with alcohol or a solvent that does not leave a
residue. Oil on the plate will cause drive slippage.
1
Figure 121
Slider
2768-020
1.
Shift arm
2.
assembly
3 - 16
Two Stage Snowthrower Drive Systems Manual
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38051, Toro 38052, Toro 38053, Toro 38054, Toro 521, Toro 522, Toro 824 |
| Model Number | 38051, 38051 38052 38053 38054 38062 38605 38607 |
| Model Year | 1990, 1991, 1992, 1993, 1994, 1995, 2000, 20012002, 2003 |
| Download File |
|
| Document Type | Service Manual |
| Language | English, Français |
| Serial Number | 210000001 - 210999999 |
| Product Name | 522, 622, 38062 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Intermediate Frame |
| Swath | 22 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 21 oz. (.62l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | 7 oz. (198gm) Lubriplate MAG-1 |
| Engine Motor Model # | HSSK50-67401S |
| Engine Motor Size | 5 hp |
| Engine Motor Type | 4 Cycle CARB1, EPA1 |
| Transmission Speed | 3 Forward/1 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)