Belts, Controls and Linkages
ADJUSTING TRACTION CONTROL
3.
Move wheel drive control lever onto the hump
between N and 1 (Figure 58). Hold wheel drive
control lever in this position — on hump.
Adjusting the Traction Control —
Toro Models 38065, 38080, 38085
Note: Lever must be held against the hump, not in
the N or 1 position.
1.
Move wheel drive control into No. 1, 1st gear.
Position control lever so its front surface is 1/4 of
an inch (6mm) from bottom of slot (Figure 56);
then hold lever in this position.
(6 mm)
Figure 58
13299-7
Figure 56
13299-5
4.
5.
Move shift arm fully to the left (Figure 57). Next,
rotate clevis at end of short rod until holes in clevis
line up with hole in shift arm (Figure 57). Secure
clevis and shift arm together with clevis pin and
cotter pin (Figure 57).
2.
While holding wheel drive control lever in position,
push up on long rod and rotate clevis until holes in
clevis line up with hole in link arm (Figure 57).
Next, secure clevis and link arm together with
clevis pin and cotter pin (Figure 57).
Tighten the jam nut against top of both clevises
(Figure 57).
1
5
4
2
3
Figure 57
13299-6
1.
2.
3.
4.
Long rod
Clevis
6.
7.
8.
Clevis
Short rod
Clevis pin and
cotter pin
Jam nut
Link arm
Clevis pin and
cotter pin
9.
5.
Shift arm
Two Stage Snowthrower Drive Systems Manual
2 - 9
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38051, Toro 38052, Toro 38053, Toro 38054, Toro 521, Toro 522, Toro 824 |
| Model Number | 38051, 38051 38052 38053 38054 38062 38605 38607 |
| Model Year | 1990, 1991, 1992, 1993, 1994, 1995, 2000, 20012002, 2003 |
| Download File |
|
| Document Type | Service Manual |
| Language | English, Français |
| Serial Number | 210000001 - 210999999 |
| Product Name | 522, 622, 38062 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Intermediate Frame |
| Swath | 22 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 21 oz. (.62l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | 7 oz. (198gm) Lubriplate MAG-1 |
| Engine Motor Model # | HSSK50-67401S |
| Engine Motor Size | 5 hp |
| Engine Motor Type | 4 Cycle CARB1, EPA1 |
| Transmission Speed | 3 Forward/1 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)