Belts, Controls and Linkages
Auger/Impeller Drive Control Linkage —
All Other Models
6.
7.
Remove the belt cover (refer to "REPLACING
THE AUGER/IMPELLER DRIVE BELT",
page 2 - 1, steps 1-2). Compress the auger/
impeller control lever and check that the slack is
removed from the auger drive belt when the lever
is 1-2 inches (2.5-5 cm) above the handgrip
(Figure 54).
There are two adjustment mechanisms used. One has
a clevis with a jam nut. The other has a rod going
through a loop with a flange nut on either side.
1.
Thread a hex flange nut (flange side down) onto
upper control rod located on right handle
(Figure 53).
Adjust the clevis or two flange nuts to obtain this
dimension, then tighten the two nuts or jam nut
securely (Figure 55).
Figure 53
654
1.
2.
3.
Traction rod
Loop
4.
5.
Flange nut
Locking flange nut
Lower traction rod
Figure 55
649
2.
3.
4.
Install lower link through outer hole in lower
control rod.
1.
2.
3.
Jam nut
Clevis
4.
5.
Lower control rod
Clevis pin
Upper control rod
6.
Cotter pin
Insert upper control rod through loop in lower link
control rod.
8.
The auger must stop when the handgrip is
released. If it does not stop, adjust the clevis or
flange units on the auger rod.
Thread a flange lock nut (flange side up) onto
bottom of upper control rod below loop in lower
link.
5.
Check the distance between the top of the
handgrip and the bottom of the auger/impeller
control lever (Figure 54). This is a preliminary
setting only.
Figure 54
665
1.
2.
Traction control
3.
4.
4 3/8 in. (11 cm)
1 to 2 in. (2.5 to
5 cm)
lever
Handgrip
2 - 8
Two Stage Snowthrower Drive Systems Manual
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38051, Toro 38052, Toro 38053, Toro 38054, Toro 521, Toro 522, Toro 824 |
| Model Number | 38051, 38051 38052 38053 38054 38062 38605 38607 |
| Model Year | 1990, 1991, 1992, 1993, 1994, 1995, 2000, 20012002, 2003 |
| Download File |
|
| Document Type | Service Manual |
| Language | English, Français |
| Serial Number | 210000001 - 210999999 |
| Product Name | 522, 622, 38062 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Intermediate Frame |
| Swath | 22 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 21 oz. (.62l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | 7 oz. (198gm) Lubriplate MAG-1 |
| Engine Motor Model # | HSSK50-67401S |
| Engine Motor Size | 5 hp |
| Engine Motor Type | 4 Cycle CARB1, EPA1 |
| Transmission Speed | 3 Forward/1 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)