Traction Drive Systems
6.
Remove 4 self-tapping screws that secure the
axle bearings to the traction frame. Lift the axle
and bearings out (Figure 89). Slide the bearings
and thrust washers off the axle.
9.
To remove the traction engagement assembly,
remove the retaining ring on the left side of the
frame. Note: Some older models use a cap screw
through the side plate into the end of the shaft.
Slide the shaft to the side and it will disengage
from the chassis (Figure 91).
Figure 89
2773-074
7.
8.
Disconnect the shift rod and traction drive rod.
Figure 91
2773-079
If the friction plate frame spring (traction belt
tension) did not unhook when the belt was
removed, unhook it now (Figure 90).
10. To remove the friction wheel and bracket
assembly, remove the bolt that goes through the
side plate into each end of the shaft. The gear
quadrant fingers should disengage themselves
from the sliding bracket that contains the friction
wheel (Figure 92).
1
2
Figure 90
2773-077
Figure 92
Sliding bracket
2773-081
1.
Gear quadrant
2.
3 - 8
Two Stage Snowthrower Drive Systems Manual
Categories | Snow Blower Manuals, Toro Snow Blower |
---|---|
Tags | Toro 38051, Toro 38052, Toro 38053, Toro 38054, Toro 521, Toro 522, Toro 824 |
Model Number | 38051, 38051 38052 38053 38054 38062 38605 38607 |
Model Year | 1990, 1991, 1992, 1993, 1994, 1995, 2000, 20012002, 2003 |
Download File |
|
Document Type | Service Manual |
Language | English, Français |
Serial Number | 210000001 - 210999999 |
Product Name | 522, 622, 38062 Snowthrower |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
Product Type | Snowthrower |
Product Series | Snowthrower, Two Stage Intermediate Frame |
Swath | 22 inch |
Discharge | Two Stage |
Engine Manufacturer | Tecumseh |
Engine Oil Type | 21 oz. (.62l) 5w-30 or 10w / API SH or higher |
Gearbox Lubricant | 7 oz. (198gm) Lubriplate MAG-1 |
Engine Motor Model # | HSSK50-67401S |
Engine Motor Size | 5 hp |
Engine Motor Type | 4 Cycle CARB1, EPA1 |
Transmission Speed | 3 Forward/1 Reverse |
Transmission Type | Friction Disc |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)