Models 38517 and 38518
Installing the Chute Crank
1.
Place the discharge chute over the chute ring, and align
the hole in the back of the discharge chute with the
center hole in the chute ring (Fig. 11).
Models 38517 and 38518
1.
Insert the flattened end of the chute crank through the
hole in the shroud while aligning the mounting bracket
with the holes in the lower handle (Fig. 12).
2
3
1
2
1
mĆ5520
Figure 11
1.
Chute ring
2. Discharge chute
2.
Insert a screw through the center hole of the chute ring
from the inside and through the hole in the discharge
chute (Fig. 11).
mĆ5545
Figure 12
3.
4.
Install a washer and a locknut on the screw, and tighten
the locknut until it is finger tight.
1.
2.
Chute crank
3. Mounting bracket
Plastic bushing
Align the remaining holes of the discharge chute and
the chute ring, and insert the 2 remaining screws
through the holes from the inside of the chute ring.
2. Slowly rotate the crank until the flattened end fits into
the hidden gear opening and the chute ring turns with
the crank (Fig. 12).
5.
6.
Install the washers and the locknuts on the screws, and
tighten the locknuts until they are finger tight.
3.
Ensure that the plastic bushing is fully inserted into the
hole in the mounting bracket. If not, slide it along the
crank and into the hole (Fig. 12).
Tighten all locknuts securely.
4.
Secure the mounting bracket to the handle with 2 bolts
and locknuts (Fig. 12).
10
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 3650, Toro 38517 |
| Model Number | 38517 |
| Model Year | 2002 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Français |
| Serial Number | 220000001 - 220999999 |
| Product Name | Toro CCR 3650 GTS Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | R-tek |
| Engine Motor Size | 5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)