Installing the Discharge Chute
Models 38515 and 38516
1.
Place the discharge chute over the chute ring, and align
the hole in the back of the discharge chute with the
center hole in the chute ring (Fig. 10).
3
2
mĆ5516
Figure 8
1
4.
5.
Loosely install the handle lock, curved washer, and
knob on the left side of the handle as shown in Figure 7.
Note: Ensure that the curved side of the curved washer
is against the handle.
mĆ5520
Insert the loose end of the control cable into the bottom
hole in the control bar (Fig. 9).
Figure 10
2
1.
2.
Chute ring
3. Chute handle
3
4
Discharge chute
2.
3.
Insert a screw through the center hole of the chute ring
from the inside and through the hole in the discharge
chute (Fig. 10).
1
Insert the chute handle over the discharge chute, and
fully insert the screw through the center hole in the
chute handle (Fig. 10).
m-5519
4.
5.
Install a washer and a locknut on the screw, and tighten
the locknut until it is finger tight.
Figure 9
1.
2.
Control cable
Control bar
3.
4.
Top hole
Bottom hole
Align the remaining holes of the chute handle, the
discharge chute, and the chute ring, and insert the 2
remaining screws through the holes from the inside of
the chute ring.
6.
Fully insert the handle locks (Fig. 3).
Ensure that the control cable is not pinched
Important
6. Install the washers and the locknuts on the screws, and
tighten the locknuts until they are finger tight.
by the upper handle or the handle lock.
7.
Tighten all locknuts securely.
7.
8.
Tighten the knobs until they are snug.
Adjust the control cable. Refer to Adjusting the Control
Cable on page 16.
9
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 3650, Toro 38517 |
| Model Number | 38517 |
| Model Year | 2002 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Français |
| Serial Number | 220000001 - 220999999 |
| Product Name | Toro CCR 3650 GTS Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | R-tek |
| Engine Motor Size | 5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)