Installing the Handle
Models 38517 and 38518
1.
Cut the plastic tie that secures the control cable to the
handle (Fig. 6).
1
3
mĆ5516
2
Figure 4
4.
Insert the loose end of the control cable into the bottom
hole in the control bar (Fig. 5).
mĆ5536
Figure 6
1.
2.
Handle
3. Control cable
Plastic tie
3
1
Important
If you do not cut the plastic tie, the rotor
4
brake will not function properly.
5
2.
Loosen the knob and pull out the handle lock on the
right side of the handle until the upper handle rotates
freely (Fig. 7).
mĆ5533
2
Figure 5
1.
2.
3.
Top hole
4.
5.
Spring cover
Control cable
1
Bottom hole
Control bar
3
2
5.
Fully insert the handle locks (Fig. 3).
Ensure that the control cable is not pinched
4
Important
by the upper handle or the handle lock.
6.
7.
Tighten the knobs until they are snug.
Adjust the control cable. Refer to Adjusting the Control
Cable on page 16.
Figure 7
1.
2.
Knob (2)
3.
4.
Upper handle
Curved washer (2)
Handle lock (2)
3.
Position the upper handle as shown in Figure 8.
8
Categories | Snow Blower Manuals, Toro Snow Blower |
---|---|
Tags | Toro 3650, Toro 38517 |
Model Number | 38517 |
Model Year | 2002 |
Download File |
|
Document Type | Operator's Manual |
Language | English, Français |
Serial Number | 220000001 - 220999999 |
Product Name | Toro CCR 3650 GTS Snowthrower |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
Product Type | Snowthrower |
Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
Swath | 20 inch |
Discharge | Single Stage |
Engine Manufacturer | Toro |
Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
Engine Motor Model # | R-tek |
Engine Motor Size | 5 hp |
Engine Motor Type | 2 Cycle EPA1 |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)