Starting the Engine
Note: Ensure that the spark plug wire is installed on the
spark plug.
1.
Ensure that the traction (Fig. 21) and reel drive (Fig. 22)
levers are in the Disengaged position.
Note: Engine will not start if traction lever is in the
engaged position.
2.
3.
4.
5.
Open the fuel shut-off valve on the engine (Fig. 23).
Move the On/Off switch (Fig. 24) to the On position.
Move the throttle control (Fig. 21) to the Fast position.
1
Move the choke lever (Fig. 23) to the half-open position
when starting a cold engine. The choke may not be
required when starting a warm engine.
2
Figure 23
1.
Choke lever
2.
Fuel shut-off valve
6.
Pull the recoil starter handle out until positive
engagement results, then pull vigorously to start the
engine.
On/Off Switch (Fig. 24)
Important
Do not pull the recoil rope to its limit or let
go of the starter handle when rope is pulled out because the
rope may break or the recoil assembly may be damaged.
Located on the rear of the engine. Move the switch to the
On position to start the engine and the Off position to stop
the engine.
7.
Close the choke as the engine warms up.
1
Stopping the Engine
1.
2.
3.
Move the traction and reel drive controls to the
Disengaged position, the throttle control to the Slow
position, and the On/Off switch to the Off position.
Pull the spark plug wire off of the spark plug to prevent
the possibility of accidental starting before storing the
machine.
2
Close the fuel shut-off valve before storing or
transporting the mower in a vehicle.
3
Driving the Machine in
Transport
Figure 24
1.
2.
Recoil starter
On/Off switch
3. Kick stand
1. Push the kick stand down with your foot and pull up on
the handle to raise the rear of mower and install the
transport wheels.
Recoil Starter (Fig. 24)
2. To release the kickstand, pull up on the handle, push the
mower forward, and then lower the rear of mower onto
the transport wheels.
Pull the recoil starter handle to start the engine.
3.
Ensure that the traction and reel drive controls are in the
Disengaged position and start the engine.
Kick Stand (Fig. 24)
Mounted to rear of the machine, the kickstand is used to
raise rear of the machine for installation or removal of the
transport wheels.
4. Set the throttle control to Slow, tip front of the machine
up gradually to the engage traction drive and slowly
increase the engine speed.
19
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 04048, Toro 04052, Toro 04060, Toro Greensmaster 1000, Toro Greensmaster 1600, Toro Greensmaster 800 |
| Model Year | 2003 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)